lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5] Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend
Hi Luiz,

If the patch looks good to you, could you help apply the patch to
bluetooth.git? It can fix the issue present in the stable kernel, I
would like to backport it earlier once it appears in the Linus tree.

Sean

On Wed, Aug 10, 2022 at 5:59 PM <sean.wang@mediatek.com> wrote:
>
> From: Sean Wang <sean.wang@mediatek.com>
>
> WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it
> needs constantly polling control pipe until the host received the WMT
> event, thus, we should require to specifically acquire PM counter on the
> USB to prevent the interface from entering auto suspended while WMT
> cmd/event in progress.
>
> Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek
> MT7668U USB devices")
> Co-developed-by: Jing Cai <jing.cai@mediatek.com>
> Signed-off-by: Jing Cai <jing.cai@mediatek.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> v2:
> 1. move usb_autopm_[get, put]_interface to btusb_mtk_hci_wmt_sync whenever
> wmt cmd is invoked.
> 2. add the explanation why we needed the specific
> usb_autopm_[get, put]_interface there.
>
> v3: correct the version and there is no logic changed
> v4: fix GitLint fail due to Title exceeds max length
> v5: rebase to fix patches does not apply
> ---
> drivers/bluetooth/btusb.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 30dd443f395f..70d61bb4a053 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2480,15 +2480,29 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
>
> set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
>
> + /* WMT cmd/event doesn't follow up the generic HCI cmd/event handling,
> + * it needs constantly polling control pipe until the host received the
> + * WMT event, thus, we should require to specifically acquire PM counter
> + * on the USB to prevent the interface from entering auto suspended
> + * while WMT cmd/event in progress.
> + */
> + err = usb_autopm_get_interface(data->intf);
> + if (err < 0)
> + goto err_free_wc;
> +
> err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
>
> if (err < 0) {
> clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
> + usb_autopm_put_interface(data->intf);
> goto err_free_wc;
> }
>
> /* Submit control IN URB on demand to process the WMT event */
> err = btusb_mtk_submit_wmt_recv_urb(hdev);
> +
> + usb_autopm_put_interface(data->intf);
> +
> if (err < 0)
> goto err_free_wc;
>
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-09-01 01:17    [W:0.038 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site