lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpio: Allow user to customise maximum number of GPIOs
On Wed, Aug 31, 2022 at 5:14 PM Davide Ciminaghi <ciminaghi@gnudd.com> wrote:
> On Wed, Aug 31, 2022 at 03:32:25PM +0200, Linus Walleij wrote:
> > On Tue, Aug 30, 2022 at 9:58 AM Davide Ciminaghi <ciminaghi@gnudd.com> wrote:
> >
> > > the sta2x11 was a chip containing AMBA peripherals and a PCIe to AMBA bridge
> > > (it is still in production as far as I know, but deprecated for new designs).
> > > It would typically be installed on x86 machines, so you needed to build and
> > > run AMBA drivers in an x86 environment. The original drivers we started from
> > > had platform data, but then we were told to switch to DTS.
> >
> > For the record I think that was bad advice, I hope it wasn't me.
> > But the world was different back then I suppose.
> > Adding DTS to x86 which is inherently ACPI is not a good idea.
> > Especially if you look at how SBSA ACPI UARTS were done
> > in drivers/tty/serial/amba-pl011.c.
> >
> now that I think of it, ACPI was also listed as a possible choice, but the
> problem was that we didn't know much about ACPI, and took the DTS way.
> So there was no bad advice, just fear of the unknown :-)

Feel free to ask, we have experts in the mailing list(s).

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2022-08-31 23:08    [W:0.534 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site