lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: lan966x: add led configuration
Date
Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which
are connected to the sgpio controller.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
arch/arm/boot/dts/lan966x-pcb8291.dts | 29 +++++++++++++++++++++++++++
arch/arm/boot/dts/lan966x-pcb8309.dts | 29 +++++++++++++++++++++++++++
2 files changed, 58 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 24d9055c4a08..649cfe69d98d 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -23,6 +23,35 @@ gpio-restart {
gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
priority = <200>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led-s0-blue {
+ label = "s0:blue";
+ gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s0-green {
+ label = "s0:green";
+ gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s1-blue {
+ label = "s1:blue";
+ gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s1-green {
+ label = "s1:green";
+ gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
};

&gpio {
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
index 05ce27ed5648..4f30975b4a13 100644
--- a/arch/arm/boot/dts/lan966x-pcb8309.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
@@ -42,6 +42,35 @@ i2c103: i2c-sfp@2 {
};
};

+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led-s0-green {
+ label = "s0:green";
+ gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s0-red {
+ label = "s0:red";
+ gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s1-green {
+ label = "s1:green";
+ gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-s1-red {
+ label = "s1:red";
+ gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
--
2.33.0
\
 
 \ /
  Last update: 2022-08-31 21:41    [W:1.577 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site