lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v6 03/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
From
Date
Quoting Fenglin Wu (2022-06-11 20:24:39)
> From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
>
> Currently, cleanup_irq() is invoked when a peripheral's interrupt
> fires and there is no mapping present in the interrupt domain of
> spmi interrupt controller.
>
> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
> and disables it at the pmic in that order. The last disable in
> cleanup_irq races with request_irq() in that it stomps over the
> enable issued by request_irq. Fix this by not writing to the pmic
> in cleanup_irq. The latched bit will be left set in the pmic,
> which will not send us more interrupts even if the enable bit
> stays enabled.
>
> When a client wants to request an interrupt, use the activate
> callback on the irq_domain to clear latched bit. This ensures
> that the latched, if set due to the above changes in cleanup_irq
> or when the bootloader leaves it set, gets cleaned up, paving way
> for upcoming interrupts to trigger.
>
> With this, there is a possibility of unwanted triggering of
> interrupt right after the latched bit is cleared - the interrupt
> may be left enabled too. To avoid that, clear the enable first
> followed by clearing the latched bit in the activate callback.
>
> Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
> Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanup")
> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
> [collinsd@codeaurora.org: fix merge conflict]
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---

Applied to spmi-next

\
 
 \ /
  Last update: 2022-08-31 19:41    [W:0.106 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site