lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ar5523: check endpoints type and direction in probe()
On Sat, Aug 27, 2022 at 01:36:29PM +0300, Mazin Al Haddad wrote:
> On Wed Aug 24, 2022 at 9:04 AM +03, Greg KH wrote:
> > On Wed, Aug 24, 2022 at 01:24:38AM +0300, Mazin Al Haddad wrote:
> > > Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
> > > due to the wrong endpoint type. There is no check for both the number
> > > of endpoints and the type which causes an error as the code tries to
> > > send a URB to the wrong endpoint.
> > >
> > > Fix it by adding a check for the number of endpoints and the
> > > direction/type of the endpoints. If the endpoints do not match the
> > > expected configuration -ENODEV is returned.
> > >
> > > Syzkaller report:
> > >
> > > usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> > > WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> > > Modules linked in:
> > > CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
> > > Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
> > > Workqueue: usb_hub_wq hub_event
> > > Call Trace:
> > > <TASK>
> > > ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
> > > ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
> > > ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
> > > ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655
> > >
> > >
> > > Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
> > > Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
> > > Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
> > > ---
> > > drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
> > > 1 file changed, 31 insertions(+)
> > >
> > > diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
> > > index 6f937d2cc126..5451bf9ab9fb 100644
> > > --- a/drivers/net/wireless/ath/ar5523/ar5523.c
> > > +++ b/drivers/net/wireless/ath/ar5523/ar5523.c
> > > @@ -1581,8 +1581,39 @@ static int ar5523_probe(struct usb_interface *intf,
> > > struct usb_device *dev = interface_to_usbdev(intf);
> > > struct ieee80211_hw *hw;
> > > struct ar5523 *ar;
> > > + struct usb_host_interface *host = intf->cur_altsetting;
> > > int error = -ENOMEM;
> > >
> > > + if (host->desc.bNumEndpoints != 4) {
> > > + dev_err(&dev->dev, "Wrong number of endpoints\n");
> > > + return -ENODEV;
> > > + }
> > > +
> > > + for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
> > > + struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
> > > + // Check for type of endpoint and direction.
> > > + switch (i) {
> > > + case 0:
> > > + case 1:
> > > + if ((ep->bEndpointAddress & USB_DIR_OUT) &&
> > > + ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> > > + == USB_ENDPOINT_XFER_BULK)){
> >
> > Did you run your change through checkpatch?
>
> Yes.
>
> > We have usb helper functions for all of this, why not use them instead
> > of attempting to roll your own?
>
> Using the helpers is indeed a lot better. I wasn't aware of all of them.
> Since find_common_endpoints() won't work here, I used the helpers for
> checking direction/type.

I don't understand why usb_find_common_endpoints() will not work here.
It seems to be very generic and should work just fine.

thanks,

greg k-h

\
 
 \ /
  Last update: 2022-08-30 14:09    [W:0.042 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site