lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/4] media: dt-bindings: media: Document RZ/G2L CRU
Hi Laurent,

Thank you for the review.

On Tue, Aug 30, 2022 at 12:42 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Aug 01, 2022 at 10:47:16PM +0100, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
> > * Dropped endpoint stuff from port1 as suggested by Rob
> > * Updated description for endpoint
> >
> > RFC v1 -> RFC v2
> > * Dropped CSI
> > ---
> > .../bindings/media/renesas,rzg2l-cru.yaml | 142 ++++++++++++++++++
> > 1 file changed, 142 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..d7389693dae9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > + The CRU image processing module is a data conversion module equipped with pixel
> > + color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> > + parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
>
> No oneOf here either.
>
Agreed, I will drop it.

> > + - items:
> > + - enum:
> > + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> > + - renesas,r9a07g054-cru # RZ/V2L
> > + - const: renesas,rzg2l-cru
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 3
> > +
> > + interrupt-names:
> > + items:
> > + - const: image_conv
> > + - const: image_conv_err
> > + - const: axi_mst_err
> > +
> > + clocks:
> > + items:
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > + - description: CRU image transfer clock
> > +
> > + clock-names:
> > + items:
> > + - const: vclk
> > + - const: pclk
> > + - const: aclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_PRESETN reset terminal
> > + - description: CRU_ARESETN reset terminal
> > +
> > + reset-names:
> > + items:
> > + - const: presetn
> > + - const: aresetn
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing a parallel input source.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + hsync-active: true
> > + vsync-active: true
> > + bus-width: true
> > + data-shift: true
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Input port node, describing the Image Processing module connected to the
> > + CSI-2 receiver.
>
> Both ports should be mandatory as they exist at the hardware level.
> Connections (through endpoints) are optional.
>
Agreed, I will make the ports as required.

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2022-08-30 13:14    [W:0.101 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site