lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv2 resend] dt-bindings: leds: Expand LED_COLOR_ID definitions
From
Hi Oliver,

On 8/19/22 17:29, Olliver Schinagl wrote:
> In commit 853a78a7d6c7 (dt-bindings: leds: Add LED_COLOR_ID definitions,
> Sun Jun 9 20:19:04 2019 +0200) the most basic color definitions where
> added. However, there's a little more very common LED colors.
>
> While the documentation states 'add what is missing', engineers tend to
> be lazy and will just use what currently exists. So this patch will take
> (a) list from online retailers [0], [1], [2] and use the common LED colors
> from there, this being reasonable as this is what is currently available to
> purchase.
>
> Note, that LIME seems to be the modern take to 'Yellow-green' or
> 'Yellowish-green' from some older datasheets.
>
> [0]: https://www.digikey.com/en/products/filter/led-lighting-color/125
> [1]: https://eu.mouser.com/c/optoelectronics/led-lighting/led-emitters/standard-leds-smd
> [2]: https://nl.farnell.com/en-NL/c/optoelectronics-displays/led-products/standard-single-colour-leds-under-75ma
>
> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> ---
>
> Changes since v1: Unbreak existing definitions.
>
>
> include/dt-bindings/leds/common.h | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
> index 3be89a7c20a9..04bf94523ea3 100644
> --- a/include/dt-bindings/leds/common.h
> +++ b/include/dt-bindings/leds/common.h
> @@ -22,18 +22,22 @@
> #define LEDS_BOOST_FIXED 2
>
> /* Standard LED colors */
> -#define LED_COLOR_ID_WHITE 0
> -#define LED_COLOR_ID_RED 1
> -#define LED_COLOR_ID_GREEN 2
> -#define LED_COLOR_ID_BLUE 3
> -#define LED_COLOR_ID_AMBER 4
> -#define LED_COLOR_ID_VIOLET 5
> -#define LED_COLOR_ID_YELLOW 6
> -#define LED_COLOR_ID_IR 7
> -#define LED_COLOR_ID_MULTI 8 /* For multicolor LEDs */
> -#define LED_COLOR_ID_RGB 9 /* For multicolor LEDs that can do arbitrary color,
> - so this would include RGBW and similar */
> -#define LED_COLOR_ID_MAX 10
> +#define LED_COLOR_ID_WHITE 0
> +#define LED_COLOR_ID_RED 1
> +#define LED_COLOR_ID_GREEN 2
> +#define LED_COLOR_ID_BLUE 3
> +#define LED_COLOR_ID_AMBER 4
> +#define LED_COLOR_ID_VIOLET 5
> +#define LED_COLOR_ID_YELLOW 6
> +#define LED_COLOR_ID_IR 7
> +#define LED_COLOR_ID_MULTI 8 /* For multicolor LEDs */
> +#define LED_COLOR_ID_RGB 9 /* For multicolor LEDs that can do arbitrary color, including RGBW etc. */
> +#define LED_COLOR_ID_PUPRPLE 10

typo - as already mentioned

> +#define LED_COLOR_ID_ORANGE 11
> +#define LED_COLOR_ID_PINK 12
> +#define LED_COLOR_ID_CYAN 13
> +#define LED_COLOR_ID_LIME 14
> +#define LED_COLOR_ID_MAX 15
>
> /* Standard LED functions */
> /* Keyboard LEDs, usually it would be input4::capslock etc. */

And it seems that change in spacing between definition name and value
is not required, is it? Without that change, it would be easier to
notice what really changes here.

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2022-08-30 12:29    [W:0.209 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site