lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 4/4] arm64: dts: ti: Add support for AM62A7-SK
    From
    On 29/08/2022 11:22, Vignesh Raghavendra wrote:
    > AM62A StarterKit (SK) board is a low cost, small form factor board
    > designed for TI’s AM62A7 SoC. It supports the following interfaces:
    > * 2 GB LPDDR4 RAM
    > * x1 Gigabit Ethernet interface
    > * x1 HDMI Port with audio
    > * x1 Headphone Jack
    > * x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port
    > * x1 UHS-1 capable µSD card slot
    > * M.2 SDIO Wifi + UART slot
    > * 1Gb OSPI NAND flash
    > * x4 UART through UART-USB bridge
    > * XDS110 for onboard JTAG debug using USB
    > * Temperature sensors, user push buttons and LEDs
    > * 40-pin User Expansion Connector
    > * 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
    > * 20-pin header for Programmable Realtime Unit (PRU) IO pins
    > * 40-pin CSI header
    >
    > Add basic support for AM62A7-SK.
    >
    > Schematics: https://www.ti.com/lit/zip/sprr459
    >
    > Co-developed-by: Bryan Brattlof <bb@ti.com>
    > Signed-off-by: Bryan Brattlof <bb@ti.com>
    > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
    > ---
    > arch/arm64/boot/dts/ti/Makefile | 2 +
    > arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 224 ++++++++++++++++++++++++
    > 2 files changed, 226 insertions(+)
    > create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
    >
    > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
    > index 02e5d80344d0..4555a5be2257 100644
    > --- a/arch/arm64/boot/dts/ti/Makefile
    > +++ b/arch/arm64/boot/dts/ti/Makefile
    > @@ -23,3 +23,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
    > dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
    >
    > dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
    > +
    > +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
    > diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
    > new file mode 100644
    > index 000000000000..994ed6865551
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
    > @@ -0,0 +1,224 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * AM62A SK: https://www.ti.com/lit/zip/sprr459
    > + *
    > + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
    > + */
    > +
    > +/dts-v1/;
    > +
    > +#include <dt-bindings/leds/common.h>
    > +#include <dt-bindings/gpio/gpio.h>
    > +#include "k3-am62a7.dtsi"
    > +
    > +/ {
    > + compatible = "ti,am62a7-sk", "ti,am62a7";
    > + model = "Texas Instruments AM62A7 SK";
    > +
    > + aliases {
    > + serial2 = &main_uart0;
    > + mmc1 = &sdhci1;
    > + };
    > +
    > + chosen {
    > + stdout-path = "serial2:115200n8";
    > + };
    > +
    > + memory@80000000 {
    > + device_type = "memory";
    > + /* 2G RAM */
    > + reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
    > +

    No need for blank line.

    With that:

    Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

    Best regards,
    Krzysztof

    \
     
     \ /
      Last update: 2022-08-30 11:59    [W:2.499 / U:0.356 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site