lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 0/2] Lattice sysCONFIG SPI FPGA manager
Date
Add support to the FPGA manager for programming Lattice FPGAs over slave
SPI sysCONFIG interface. ECP5 and MachXO2 are supported.

WARNING: I only have HW with ECP5, so can't vouch for the MachXO2.
MachXO2's support is based on existing machxo2-spi.c and
publicly available documentation, it's not tested on real
hardware.

ChangeLog:
v1 -> v2:
* remove "spi" from compatible string
* reword description in dt-bindings doc
* add reference to spi-peripheral-props.yaml in dt-binding doc
* fix DTS example in dt-bindings doc: 4-spaces indentations, no
undersores in node names.
v2 -> v3:
* fix typo "##size-cells" -> "#size-cells" in dt-bindings example
v3 -> v4:
* dt-bindings: reword description
* dt-bindings: revert props order
v4 -> v5:
* dt-bindings: remove trailing dot from title
* dt-bindings: reword description to avoid driver reference
* dt-bindings: add "Reviewed-by: Krzysztof Kozlowski" tag
v5 -> v6:
* ecp5-spi: lock SPI bus for exclusive usage in
ecp5_ops_write_init(), release in ecp5_ops_write_complete()
or on error
v6 -> v7:
* ecp5-spi.c -> lattice-sysconfig-spi.c. Reworked to represent
generalized sysCONFIG port with implementations for ECP5 and
MachXO2
* lattice,ecp5-fpga-mgr.yaml -> lattice,sysconfig.yaml. Reworked to
document both ECP5 and MachXO2 sysCONFIG.
* dt-bindings: remove "Reviewed-by: Krzysztof Kozlowski" tag as doc
was rewritten by a considerable amount.
v7 -> v8:
* dt-bindings: move "program-gpios", "init-gpios" and "done-gpios"
to top-level properties and disallow them for MachXO2 variant.
v8 -> v9:
* dt-bindings: "program-gpios", "init-gpios" and "done-gpios" are
now optional for both ECP5 and MachXO2
* lattice-sysconfig-spi.c -> sysconfig-spi.c + sysconfig.c +
sysconfig.h
** reworked to be one sysCONFIG FPGA Manager rather than two
distinct ECP5 and MachXO2 managers
** splitted to port type agnostic sysconfig.c and SPI-specific
sysconfig-spi.c
** command transfer function moved to callback for ease of
adding another port type, such as I2C

Ivan Bornyakov (2):
fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager
dt-bindings: fpga: document Lattice sysCONFIG FPGA manager

.../bindings/fpga/lattice,sysconfig.yaml | 102 +++++
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 3 +
drivers/fpga/sysconfig-spi.c | 216 +++++++++
drivers/fpga/sysconfig.c | 433 ++++++++++++++++++
drivers/fpga/sysconfig.h | 67 +++
6 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
create mode 100644 drivers/fpga/sysconfig-spi.c
create mode 100644 drivers/fpga/sysconfig.c
create mode 100644 drivers/fpga/sysconfig.h

--
2.37.2


\
 
 \ /
  Last update: 2022-08-30 11:56    [W:0.069 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site