lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 1/1] gpio: mpfs: add polarfire soc gpio support
Date
On Mon, 2022-08-22 at 13:28 +0200, Linus Walleij wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> On Mon, Aug 15, 2022 at 2:08 PM <lewis.hanly@microchip.com> wrote:
>
> > From: Lewis Hanly <lewis.hanly@microchip.com>
> >
> > Add a driver to support the Polarfire SoC gpio controller
> >
> > Signed-off-by: Lewis Hanly <lewis.hanly@microchip.com>
>
> This looks like textbook example of a driver that can use
> CONFIG_GPIO_GENERIC
>
> > +config GPIO_POLARFIRE_SOC
> > + bool "Microchip FPGA GPIO support"
> > + depends on OF_GPIO
> > + select GPIOLIB_IRQCHIP
>
> select GPIO_GENERIC
>
> See e.g. drivers/gpio/gpio-ftgpio010.c for an example
> of how to use bgpio_init() to set up the helper library to handle
> the GPIO side of things and combine it with an irqchip.
> You get get/set_multiple() for free with this approach.
> Also see documentation for bgpio_init() in
> drivers/gpio/gpio-mmio.c.
>
> Yours,
> Linus Walleij

Thank you for the feedback.
We had looked at the bpgpio_init, our controller is not fully memory
mapped to support the bgpio_init() and get all routines for free.
While we have in/out and intr (interrupt state) 32-bit registers, we
would not get as much free as other generic memory mapped controllers.



For details on the gpio controller:
https://onlinedocs.microchip.com/pr/GUID-0E320577-28E6-4365-9BB8-9E1416A0A6E4-en-US-3/index.html?GUID-A0214F3C-C68A-45A9-B81C-4695A58C4A46#GUID-A0214F3C-C68A-45A9-B81C-4695A58C4A46__ID-00000AB0

\
 
 \ /
  Last update: 2022-08-30 06:51    [W:0.090 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site