lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 10/10] arm64: dts: marvell: add support for Methode eDPU
Date
Robert Marko <robert.marko@sartura.hr> writes:

> On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@sartura.hr> wrote:
>>
>> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU.
>>
>> They feature the same CPU, RAM, and storage as well as the form factor.
>>
>> However, eDPU only has one SFP slot plus a copper G.hn port.
>>
>> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> Changes in v2:
>> * Make the DTS split a separate commit
>> ---
>> arch/arm64/boot/dts/marvell/Makefile | 1 +
>> arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++
>> 2 files changed, 15 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>>
>> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
>> index 1c794cdcb8e6..104d7d7e8215 100644
>> --- a/arch/arm64/boot/dts/marvell/Makefile
>> +++ b/arch/arm64/boot/dts/marvell/Makefile
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>> # Mvebu SoC Family
>> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
>> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
>> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
>> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
>> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
>> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> new file mode 100644
>> index 000000000000..57fc698e55d0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
>> @@ -0,0 +1,14 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +/dts-v1/;
>> +
>> +#include "armada-3720-uDPU.dtsi"
>> +
>> +/ {
>> + model = "Methode eDPU Board";
>> + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
>> +};
>> +
>> +&eth0 {
>> + phy-mode = "2500base-x";
>> +};
>> --
>> 2.36.1
>>
>
> Hi Gregory,
Hello Roberto,

> Is there something else that I can improve in the series?

Sorry for having missed this series. At first view it seems OK, I am
going to have a closer look this week.

Gregory


>
> Regards,
> Robert
>
> --
> Robert Marko
> Staff Embedded Linux Engineer
> Sartura Ltd.
> Lendavska ulica 16a
> 10000 Zagreb, Croatia
> Email: robert.marko@sartura.hr
> Web: www.sartura.hr

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2022-08-30 09:43    [W:0.089 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site