lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] Input: elan_i2c - Use PM subsystem to manage wake irq
Date
The Elan I2C touchpad driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, so it's only required when using ACPI. The net result is that this
change should be a no-op. i2c_device_remove also already calls
dev_pm_clear_wake_irq, so we don't need to do that in this driver.

I tested this on an ACPI system where the touchpad doesn't have _PRW
defined. I verified I can still wake the system and that the wake source
was the touchpad IRQ GPIO.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

drivers/input/mouse/elan_i2c_core.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index e1758d5ffe4218..7d997d2b56436b 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -33,6 +33,7 @@
#include <linux/jiffies.h>
#include <linux/completion.h>
#include <linux/of.h>
+#include <linux/pm_wakeirq.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <asm/unaligned.h>
@@ -86,8 +87,6 @@ struct elan_tp_data {
u16 fw_page_size;
u32 fw_signature_address;

- bool irq_wake;
-
u8 min_baseline;
u8 max_baseline;
bool baseline_ready;
@@ -1337,8 +1336,10 @@ static int elan_probe(struct i2c_client *client,
* Systems using device tree should set up wakeup via DTS,
* the rest will configure device as wakeup source by default.
*/
- if (!dev->of_node)
+ if (!dev->of_node) {
device_init_wakeup(dev, true);
+ dev_pm_set_wake_irq(dev, client->irq);
+ }

return 0;
}
@@ -1362,8 +1363,6 @@ static int __maybe_unused elan_suspend(struct device *dev)

if (device_may_wakeup(dev)) {
ret = elan_sleep(data);
- /* Enable wake from IRQ */
- data->irq_wake = (enable_irq_wake(client->irq) == 0);
} else {
ret = elan_set_power(data, false);
if (ret)
@@ -1394,9 +1393,6 @@ static int __maybe_unused elan_resume(struct device *dev)
dev_err(dev, "error %d enabling regulator\n", error);
goto err;
}
- } else if (data->irq_wake) {
- disable_irq_wake(client->irq);
- data->irq_wake = false;
}

error = elan_set_power(data, true);
--
2.37.2.672.g94769d06f0-goog
\
 
 \ /
  Last update: 2022-08-31 01:17    [W:0.174 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site