lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: reset: syscon-reboot: Add priority property
Date
This new optional priority property allows to specify custom priority level
of reset device. Default level was always 192.

Signed-off-by: Pali Rohár <pali@kernel.org>

---
Changes in v2:
* Change sint32 to int32
* Add default
---
.../devicetree/bindings/power/reset/syscon-reboot.yaml | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index da2509724812..4c8b0d0a0111 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -42,6 +42,11 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
description: The reset value written to the reboot register (32 bit access).

+ priority:
+ $ref: /schemas/types.yaml#/definitions/int32
+ description: Priority level of this syscon reset device.
+ default: 192
+
required:
- compatible
- offset
--
2.20.1
\
 
 \ /
  Last update: 2022-08-31 01:01    [W:0.193 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site