lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] PCI: Disable PTM on Upstream Ports during suspend
From


On 8/30/22 8:52 AM, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> During suspend, we want to disable PTM on Root Ports because that allows
> some chips, e.g., Intel mobile chips since Coffee Lake, to enter a
> lower-power PM state.
>
> Previously we only disabled PTM for Root Ports, but PCIe r6.0, sec 2.2.8,
> strongly recommends that functions support generation of Messages in non-D0
> states, so we must assume that Switch Upstream Ports or Endpoints may send
> PTM Request Messages while in D1, D2, and D3hot.
>
> A PTM Message received by a Downstream Port, e.g., a Root Port, with PTM
> disabled must be treated as an Unsupported Request (sec 6.21.3).
>
> With this topology:
>
> 0000:00:1d.0 Root Port to [bus 08-71]
> 0000:08:00.0 Switch Upstream Port to [bus 09-71]
>
> Kai-Heng reported errors like this:
>
> pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
> pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> pcieport 0000:00:1d.0: device [8086:7ab0] error status/mask=00100000/00004000
> pcieport 0000:00:1d.0: [20] UnsupReq (First)
> pcieport 0000:00:1d.0: AER: TLP Header: 34000000 08000052 00000000 00000000
>
> Decoding this (from PCIe r6.0, sec 2.2.1.1, 2.2.8.10) shows that 00:1d.0
> logged an Unsupported Request error when it received a PTM Request with
> Requester ID 08:00.0.
>
> To prevent this error, disable PTM when suspending Upstream Ports
> (including those on Endpoints), not just Root Ports.
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216210
> Based-on: https://lore.kernel.org/r/20220706123244.18056-1-kai.heng.feng@canonical.com
> Based-on-patch-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Cc: David E. Box <david.e.box@linux.intel.com>
> Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---

Looks good to me

Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

> drivers/pci/pci.c | 30 ++++++++++++++----------------
> drivers/pci/pcie/ptm.c | 8 +++++++-
> 2 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 95bc329e74c0..96487a9ce5bf 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2707,14 +2707,19 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
> return -EIO;
>
> /*
> - * There are systems (for example, Intel mobile chips since Coffee
> - * Lake) where the power drawn while suspended can be significantly
> - * reduced by disabling PTM on PCIe root ports as this allows the
> - * port to enter a lower-power PM state and the SoC to reach a
> - * lower-power idle state as a whole.
> + * We want to disable PTM on Root Ports because that allows some
> + * chips, e.g., Intel mobile chips since Coffee Lake, to enter a
> + * lower-power PM state.
> + *
> + * PCIe r6.0, sec 2.2.8, strongly recommends that functions support
> + * generation of messages in non-D0 states, so we assume Switch
> + * Upstream Ports or Endpoints may send PTM Requests while in D1,
> + * D2, and D3hot. A PTM message received by a Downstream Port
> + * (including a Root Port) with PTM disabled must be treated as an
> + * Unsupported Request (sec 6.21.3). To prevent this error,
> + * disable PTM in *all* devices, not just Root Ports.
> */
> - if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
> - pci_disable_ptm(dev);
> + pci_disable_ptm(dev);
>
> pci_enable_wake(dev, target_state, wakeup);
>
> @@ -2764,15 +2769,8 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
> if (target_state == PCI_POWER_ERROR)
> return -EIO;
>
> - /*
> - * There are systems (for example, Intel mobile chips since Coffee
> - * Lake) where the power drawn while suspended can be significantly
> - * reduced by disabling PTM on PCIe root ports as this allows the
> - * port to enter a lower-power PM state and the SoC to reach a
> - * lower-power idle state as a whole.
> - */
> - if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
> - pci_disable_ptm(dev);
> + /* See rationale above for disabling PTM */
> + pci_disable_ptm(dev);
>
> __pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
>
> diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
> index 368a254e3124..ec338470d13f 100644
> --- a/drivers/pci/pcie/ptm.c
> +++ b/drivers/pci/pcie/ptm.c
> @@ -31,12 +31,18 @@ static void pci_ptm_info(struct pci_dev *dev)
>
> void pci_disable_ptm(struct pci_dev *dev)
> {
> - int ptm;
> + int type, ptm;
> u16 ctrl;
>
> if (!pci_is_pcie(dev))
> return;
>
> + type = pci_pcie_type(dev);
> + if (!(type == PCI_EXP_TYPE_ROOT_PORT ||
> + type == PCI_EXP_TYPE_UPSTREAM ||
> + type == PCI_EXP_TYPE_ENDPOINT))
> + return;
> +
> ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
> if (!ptm)
> return;

--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer

\
 
 \ /
  Last update: 2022-08-30 18:36    [W:0.041 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site