lkml.org 
[lkml]   [2022]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 2/4] dt-bindings: display: add new bus-format property for panel-dpi
From
On 6/28/22 20:18, Max Krummenacher wrote:

Hello Max,

[...]

> diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
> index dae0676b5c6e..52f5db03b6a8 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
> @@ -26,7 +26,28 @@ properties:
> height-mm: true
> label: true
> panel-timing: true
> - port: true
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description:
> + Input port node, receives the panel data.
> +
> + properties:
> + endpoint:
> + $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +
> + properties:
> + bus-format:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x1001
> + maximum: 0x1fff
> + description: |
> + Describes how the display panel is connected to the display interface.
> + Valid values are defined in <dt-bindings/display/dt-media-bus-format.h>.
> + The mapping between the color/significance of the panel lines to the
> + parallel data lines are defined in:
> + https://www.kernel.org/doc/html/v5.17/userspace-api/media/v4l/subdev-formats.html#packed-rgb-formats

I am not sure whether I should re-open this discussion, but I still
wonder, wouldn't it be better to describe the DPI bus color channel
ordering (RGB, BGR, ...), width of each color channel in bits, pixel
format (RGB, YUV, ...) instead of using specific constants for the
entire format ?

\
 
 \ /
  Last update: 2022-08-03 10:22    [W:0.164 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site