lkml.org 
[lkml]   [2022]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH v3 00/13] PM6125 regulator support
    From
    On 01/08/2022 01:37, Iskren Chernev wrote:
    > This patch series adds SPMI and SMD regulator support for the PM6125 found on
    > SM4250/SM6115 SoCs from QCom.
    >
    > This code has been tested on:
    > * OnePlus Nord N100 (oneplus,billie2, SoC sm4250)
    > * Redmi 9T (redmi,lemon, SoC sm6115)
    >
    > The main source used for this change is qpnp pm6125 support patch from caf [1]:
    >
    > [1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5
    >
    > v2: https://lkml.org/lkml/2022/7/26/885
    > v1: https://lkml.org/lkml/2021/8/28/144
    >
    > Changes from v2:
    > - split spmi new regulator support in 2 patches
    > - FTS and LDOs now have set_load and set_pull_down ops
    > - add better commit messages on spmi patches
    > - fix sob header order
    > - fix tested device info (Redmi 9T, NOT Xiaomi 9T)
    > - improve formatting in spmi binding docs
    > - sort alphabetically in smd binding docs
    > - sort alphabetically spmi pmics
    > - sort alphabetically smd pmics
    > Changes from v1:
    > - add dt-bindings
    > - split SPMI patch into new reg types and the new PMIC
    > - add correct supply mapping
    >
    > Iskren Chernev (13):
    > dt-bindings: regulator: qcom_spmi: Improve formatting of if-then
    > blocks
    > dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC
    > dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically
    > dt-bindings: regulator: qcom_smd: Document PM6125 PMIC
    > regulator: qcom_spmi: Add support for new regulator types
    > regulator: qcom_spmi: Add support for HFSMPS regulator type
    > regulator: qcom_spmi: Sort pmics alphabetically (part 1)
    > regulator: qcom_spmi: Sort pmics alphabetically (part 2)
    > regulator: qcom_spmi: Add PM6125 PMIC support
    > regulator: qcom_smd: Sort pmics alphabetically (part 1)
    > regulator: qcom_smd: Sort pmics alphabetically (part 2)
    > regulator: qcom_smd: Sort pmics alphabetically (part 3)

    What is the reason for these part1/2 and part1/2/3 splits? I think you
    can collapse them into two respective patches, one sorting of spmi,
    another one sorting the smd regulators

    > regulator: qcom_smd: Add PM6125 regulators support
    >
    > .../regulator/qcom,smd-rpm-regulator.yaml | 26 +-
    > .../regulator/qcom,spmi-regulator.yaml | 32 ++
    > drivers/regulator/qcom_smd-regulator.c | 400 ++++++++++--------
    > drivers/regulator/qcom_spmi-regulator.c | 383 ++++++++++++-----
    > 4 files changed, 556 insertions(+), 285 deletions(-)
    >


    --
    With best wishes
    Dmitry

    \
     
     \ /
      Last update: 2022-08-03 10:06    [W:2.052 / U:0.844 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site