lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: stm32-qspi: Fix pm_runtime management in stm32_qspi_transfer_one_message()
Date
From: Patrice Chotard <patrice.chotard@foss.st.com>

ctrl->auto_runtime_pm was wrongly set to true when adding
transfer_one_message() callback.
As explained in commit 6e6ccb3d4cdc ("spi: stm32-qspi: Add pm_runtime support")
the expected behavior is to prevent runtime suspends between each transfer.

Add needed pm_runtime API calls in stm32_qspi_transfer_one_message().

Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
drivers/spi/spi-stm32-qspi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 679fd1c34f7e..227f450aa5f0 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -567,6 +567,10 @@ static int stm32_qspi_transfer_one_message(struct spi_controller *ctrl,
if (!spi->cs_gpiod)
return -EOPNOTSUPP;

+ ret = pm_runtime_resume_and_get(qspi->dev);
+ if (ret < 0)
+ return ret;
+
mutex_lock(&qspi->lock);

gpiod_set_value_cansleep(spi->cs_gpiod, true);
@@ -629,6 +633,9 @@ static int stm32_qspi_transfer_one_message(struct spi_controller *ctrl,
msg->status = ret;
spi_finalize_current_message(ctrl);

+ pm_runtime_mark_last_busy(qspi->dev);
+ pm_runtime_put_autosuspend(qspi->dev);
+
return ret;
}

@@ -847,7 +854,6 @@ static int stm32_qspi_probe(struct platform_device *pdev)
ctrl->mem_ops = &stm32_qspi_mem_ops;
ctrl->use_gpio_descriptors = true;
ctrl->transfer_one_message = stm32_qspi_transfer_one_message;
- ctrl->auto_runtime_pm = true;
ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
ctrl->dev.of_node = dev->of_node;

--
2.25.1
\
 
 \ /
  Last update: 2022-08-29 14:49    [W:0.037 / U:1.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site