lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions
+Vincent.

On 24-08-22, 15:41, Lukasz Luba wrote:
> Hi Jeremy,
>
> +CC Dietmar, Morten and Souvik
>
> On 8/18/22 22:16, Jeremy Linton wrote:
> > PCC regions utilize a mailbox to set/retrieve register values used by
> > the CPPC code. This is fine as long as the operations are
> > infrequent. With the FIE code enabled though the overhead can range
> > from 2-11% of system CPU overhead (ex: as measured by top) on Arm
> > based machines.
> >
> > So, before enabling FIE assure none of the registers used by
> > cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
> > enable a module parameter which can also disable it at boot or module
> > reload.
> >
> > Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> > ---
> > drivers/acpi/cppc_acpi.c | 41 ++++++++++++++++++++++++++++++++++
> > drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
> > include/acpi/cppc_acpi.h | 5 +++++
> > 3 files changed, 73 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> > index 1e15a9f25ae9..c840bf606b30 100644
> > --- a/drivers/acpi/cppc_acpi.c
> > +++ b/drivers/acpi/cppc_acpi.c
> > @@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
> > }
> > EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
> > +/**
> > + * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
> > + *
> > + * CPPC has flexibility about how counters describing CPU perf are delivered.
> > + * One of the choices is PCC regions, which can have a high access latency. This
> > + * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
> > + *
> > + * Return: true if any of the counters are in PCC regions, false otherwise
> > + */
> > +bool cppc_perf_ctrs_in_pcc(void)
> > +{
> > + int cpu;
> > +
> > + for_each_present_cpu(cpu) {
> > + struct cpc_register_resource *ref_perf_reg;
> > + struct cpc_desc *cpc_desc;
> > +
> > + cpc_desc = per_cpu(cpc_desc_ptr, cpu);
> > +
> > + if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
> > + CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
> > + CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
> > + return true;
> > +
> > +
> > + ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
> > +
> > + /*
> > + * If reference perf register is not supported then we should
> > + * use the nominal perf value
> > + */
> > + if (!CPC_SUPPORTED(ref_perf_reg))
> > + ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
> > +
> > + if (CPC_IN_PCC(ref_perf_reg))
> > + return true;
> > + }
>
> Do we have a platform which returns false here?
>
> > + return false;
> > +}
> > +EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
> > +
> > /**
> > * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
> > * @cpunum: CPU from which to read counters.
> > diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> > index 24eaf0ec344d..32fcb0bf74a4 100644
> > --- a/drivers/cpufreq/cppc_cpufreq.c
> > +++ b/drivers/cpufreq/cppc_cpufreq.c
> > @@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
> > static struct cpufreq_driver cppc_cpufreq_driver;
> > +static enum {
> > + FIE_UNSET = -1,
> > + FIE_ENABLED,
> > + FIE_DISABLED
> > +} fie_disabled = FIE_UNSET;
> > +
> > #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
> > +module_param(fie_disabled, int, 0444);
> > +MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
>
> Why we need the modules support?
> I would drop this, since the fie_disabled would be set properly when
> needed. The code would be cleaner (more below).
>
> > /* Frequency invariance support */
> > struct cppc_freq_invariance {
> > @@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
> > struct cppc_freq_invariance *cppc_fi;
> > int cpu, ret;
> > - if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
> > + if (fie_disabled)
> > return;
> > for_each_cpu(cpu, policy->cpus) {
> > @@ -199,7 +207,7 @@ static void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy)
> > struct cppc_freq_invariance *cppc_fi;
> > int cpu;
> > - if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
> > + if (fie_disabled)
> > return;
> > /* policy->cpus will be empty here, use related_cpus instead */
> > @@ -229,7 +237,21 @@ static void __init cppc_freq_invariance_init(void)
> > };
> > int ret;
> > - if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
> > + switch (fie_disabled) {
> > + /* honor user request */
> > + case FIE_DISABLED:
> > + case FIE_ENABLED:
>
> This module's over-write doesn't look 'clean'.
> Is it OK to allow a user to go with the poor performing
> system (likely on many platforms)? Or we assume that there are
> platforms which has a bit faster mailboxes and they already
> have the FIE issue impacting task's utilization measurements.
>
> It looks like we are not sure about the solution. On one hand
> we implement those checks in the cppc_perf_ctrs_in_pcc()
> which could set the flag, but on the other hand we allow user
> to decide. IMO this creates diversity that we are not able to control.
> It creates another tunable knob in the kernel, which then is forgotten
> to check.
>
> I still haven't seen information that the old FIE was an issue on those
> servers and had impact on task utilization measurements. This should be
> a main requirement for this new feature. This would be after we proved
> that the utilization problem was due to the FIE and not something else (like
> uArch variation or workload variation).
>
> IMO let's revert the ACPI_CPPC_CPUFREQ_FIE. When we get data that
> FIE is an issue on those servers we can come back to this topic.
>
> Regards,
> Lukasz

--
viresh

\
 
 \ /
  Last update: 2022-08-30 05:28    [W:0.093 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site