lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support
Date
> -----Original Message-----
> From: Lucas Stach <l.stach@pengutronix.de>
> Sent: 2022年8月29日 23:23
> To: Hongxing Zhu <hongxing.zhu@nxp.com>; p.zabel@pengutronix.de;
> bhelgaas@google.com; lorenzo.pieralisi@arm.com; robh@kernel.org;
> shawnguo@kernel.org; vkoul@kernel.org; alexander.stein@ew.tq-group.com;
> marex@denx.de; richard.leitner@linux.dev
> Cc: linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support
>
> Am Montag, dem 29.08.2022 um 16:15 +0800 schrieb Richard Zhu:
> > Add i.MX8MP PCIe support.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Tested-by: Marek Vasut <marex@denx.de>
> > Tested-by: Richard Leitner <richard.leitner@skidata.com>
> > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 46
> > ++++++++++++++++++++++-
> > 1 file changed, 45 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index fe178b7d063c..d11f079fd1f3 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -5,6 +5,7 @@
> >
> > #include <dt-bindings/clock/imx8mp-clock.h>
> > #include <dt-bindings/power/imx8mp-power.h>
> > +#include <dt-bindings/reset/imx8mp-reset.h>
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > @@ -410,7 +411,8 @@ iomuxc: pinctrl@30330000 {
> > };
> >
> > gpr: iomuxc-gpr@30340000 {
> > - compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
> > + compatible = "fsl,imx8mp-iomuxc-gpr",
> > + "fsl,imx6q-iomuxc-gpr", "syscon";
>
> I don't like this part. The iomux GPR in the i.MX8M* is not really compatible
> with the i.MX6Q, so I think it's a pretty bad idea to claim it is. Why can't we
> have this syscon looked up by phandle, like we discussed in some early version
> of the i.MX8MM patchset? Sorry, for not catching this on the 8MM submission,
> I was pretty busy back then.
Okay, got that. Thanks.
Would be changed, and fetch the gpr regmap by phandle in v5 later.

Best Regards
Richard Zhu

>
> Regards,
> Lucas
>
> > reg = <0x30340000 0x10000>;
> > };
> >
> > @@ -1084,6 +1086,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
> > #power-domain-cells = <1>;
> > };
> >
> > + pcie_phy: pcie-phy@32f00000 {
> > + compatible = "fsl,imx8mp-pcie-phy";
> > + reg = <0x32f00000 0x10000>;
> > + resets = <&src IMX8MP_RESET_PCIEPHY>,
> > + <&src IMX8MP_RESET_PCIEPHY_PERST>;
> > + reset-names = "pciephy", "perst";
> > + power-domains = <&hsio_blk_ctrl
> IMX8MP_HSIOBLK_PD_PCIE_PHY>;
> > + #phy-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > hsio_blk_ctrl: blk-ctrl@32f10000 {
> > compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
> > reg = <0x32f10000 0x24>;
> > @@ -1099,6 +1112,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
> > };
> > };
> >
> > + pcie: pcie@33800000 {
> > + compatible = "fsl,imx8mp-pcie";
> > + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
> > + reg-names = "dbi", "config";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + bus-range = <0x00 0xff>;
> > + ranges = <0x81000000 0 0x00000000 0x1ff80000 0
> 0x00010000>, /* downstream I/O 64KB */
> > + <0x82000000 0 0x18000000 0x18000000 0
> 0x07f00000>; /* non-prefetchable memory */
> > + num-lanes = <1>;
> > + num-viewport = <4>;
> > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "msi";
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 0x7>;
> > + interrupt-map = <0 0 0 1 &gic GIC_SPI 126
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> > + fsl,max-link-speed = <3>;
> > + linux,pci-domain = <0>;
> > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
> > + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
> > + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
> > + reset-names = "apps", "turnoff";
> > + phys = <&pcie_phy>;
> > + phy-names = "pcie-phy";
> > + status = "disabled";
> > + };
> > +
> > gpu3d: gpu@38000000 {
> > compatible = "vivante,gc";
> > reg = <0x38000000 0x8000>;
>

\
 
 \ /
  Last update: 2022-08-30 04:59    [W:1.741 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site