lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH 0/9] ublk_drv: add USER_RECOVERY support
From
On 2022/8/29 13:56, Ming Lei wrote:
> On Mon, Aug 29, 2022 at 12:00:49PM +0800, Ziyang Zhang wrote:
>> On 2022/8/29 10:08, Ming Lei wrote:
>>> On Wed, Aug 24, 2022 at 01:47:35PM +0800, ZiyangZhang wrote:
>>>> ublk_drv is a driver simply passes all blk-mq rqs to ublksrv[1] in
>>>> userspace. For each ublk queue, there is one ubq_daemon(pthread).
>>>> All ubq_daemons share the same process which opens /dev/ublkcX.
>>>> The ubq_daemon code infinitely loops on io_uring_enter() to
>>>> send/receive io_uring cmds which pass information of blk-mq
>>>> rqs.
>>>>
>>>> Now, if one ubq_daemon(pthread) or the process crashes, ublk_drv
>>>> must abort the dying ubq, stop the device and release everything.
>>>> This is not a good choice in practice because users do not expect
>>>> aborted requests, I/O errors and a released device. They may want
>>>> a recovery machenism so that no requests are aborted and no I/O
>>>> error occurs. Anyway, users just want everything works as uaual.
>>>
>>> I understand the requirement is that both /dev/ublkbN and /dev/ublkcN
>>> won't be deleted & re-added from user viewpoint after user recovery,
>>> so the device context won't be lost.
>>
>> Yes, after the 'process' is killed or crashed(such as segmentation fault)
>> both /dev/ublkb0 and /dev/ublkc0 is not deleted.
>>
>>>
>>>>
>>>> This RFC patchset implements USER_RECOVERY support. If the process
>>>> crashes, we allow ublksrv to provide new process and ubq_daemons.
>>>> We do not support single ubq_daemon(pthread) recovery because a
>>>> pthread rarely crashes.
>>>>
>>>> Recovery feature is quite useful for products do not expect to
>>>> return any I/O error to frontend users.
>>>
>>> That looks one very ideal requirement. To be honest, no any block driver
>>> can guarantee that 100%, so it is just one soft requirement?
>>>
>>> Cause memory allocation may fail, network may be disconnected,
>>> re-creating pthread or process may fail too, ...
>>
>> Yes, I know there are many other problem which may cause a failure.
>>
>> The recovery mechanism only guarantees that rqs sent to ublksrv
>> before crash are not aborted. Instead, ublk_drv re-issues the request
>> itself and fio does not konw about it. Of course the backend must
>> tolerate a double-write/read.
>
> My comment is for 'do not expect to return any I/O error to frontend users',
> and I still think it is just one soft requirement, and no one can
> guarantee there isn't any error for frontend users really.

Yes, I get your point now. Indeed it is just one soft requirement.

>
>>
>>>
>>>> In detail, we support
>>>> this scenario:
>>>> (1) The /dev/ublkc0 is opened by process 0;
>>>> (2) Fio is running on /dev/ublkb0 exposed by ublk_drv and all
>>>> rqs are handled by process 0.
>>>> (3) Process 0 suddenly crashes(e.g. segfault);
>>>> (4) Fio is still running and submit IOs(but these IOs cannot
>>>> complete now)
>>>> (5) User recovers with process 1 and attach it to /dev/ublkc0
>>>> (6) All rqs are handled by process 1 now and IOs can be
>>>> completed now.
>>>>
>>>> Note: The backend must tolerate double-write because we re-issue
>>>> a rq sent to the old(dying) process before. We allow users to
>>>> choose whether re-issue these rqs or not, please see patch 7 for
>>>> more detail.
>>>>
>>>> We provide a sample script here to simulate the above steps:
>>>>
>>>> ***************************script***************************
>>>> LOOPS=10
>>>>
>>>> __ublk_get_pid() {
>>>> pid=`./ublk list -n 0 | grep "pid" | awk '{print $7}'`
>>>> echo $pid
>>>> }
>>>>
>>>> ublk_recover_kill()
>>>> {
>>>> for CNT in `seq $LOOPS`; do
>>>> dmesg -C
>>>> pid=`__ublk_get_pid`
>>>> echo -e "*** kill $pid now ***"
>>>> kill -9 $pid
>>>> sleep 2
>>>> echo -e "*** recover now ***"
>>>> ./ublk recover -n 0
>>>
>>> The current behavior is that /dev/ublkb* is removed after device is
>>> aborted because ubq daemon is killed.
>>>
>>> What if 'ublk recover' command isn't sent? So the current behavior
>>> without recovery is changed? Or just changed with this feature enabled?
>>
>> No, I do not change the default behavior. You can verify this by running
>> generic/002 and generic/003. These tests passes with either recovery enabled
>> or disabled.
>>
>>
>> (1) With recovery disabled, the monitor_work scheduled periodically or
>> STOP_DEV ctrl-cmd issued manually can cleanup everything and remove the
>> gendisk.
>>
>> (2)With recovery enabled, the monitor_work is not scheduled anymore, see
>> patch 9. So after a crash,all resources are still in kernel.
>> Then, there are two options for a user:
>> (a) You don't want to recover it, so just send STOP_DEV ctrl-cmd. This will
>> schedule monitor_work once and cleanup everything. Please see patch 5.
>
> But what if people sends nothing and starts to reboot, then hang forever without
> monitor_work involved.

Emm... you are right. But here is a conflict: I must reserve resources for a
potential recovery mission, but I may hang if the user directly reboots...

What about add a systemd service?

>
>> (b) You want to recover it, so just send START_RECOVERY ctrl-cmd. Then you
>> HAVE TO start a new process and send END_RECOVERY.
>>
>> Note: Actually I am thinking what if a user has sent START_RECOVERY but he fails
>> to start a new process. I have a rough idea: just abort all rqs after we unqiuesce
>> the request queue. But that is not included in this RFC patchset because I
>> want to make it simpler. Maybe we can consider it later?
>
> It is pretty easy to fail all in-queue requests when user recovery
> can't move on.

Actually I wrote some code not included in the patchset:

(0) Now the request_queue is quiesced since we are after START_RECOVERY.

(1) mark all ubqs as 'force_abort', which makes ublk_queue_rq() fail
all IOs before calling blk_mq_atart_request() after unqiescing
request_queue.

(2) end(abort) all rqs inflight. Note that set of inflight does not change
since we are quiesced.

(3) unqiesce request_queue. Note that set of inflight rqs does not change
since we marked all ubqs as 'force_abort'. We have to unqiesce or del_gendisk()
will hang forever(not sure I am correct).

(4) del_gendisk()

(5) complete ALL ioucmds by calling io_uring_cmd_done()

But this is really a ugly implementation since I do not consider:

(1) After START_RECOVERY, what if the new process crashes 'before' all FETCH_REQ
cmds are sent(some ubqs are ready while others are not).

(2) After START_RECOVERY, what if the new process crashes 'after' all FETCH_REQ
cmds are sent but 'before' END_RECOVERY.


Ming, I suggest that this could be added in a future patch because I want to make
this one simple and easy to understand :)

If you do not agree, I can add this in next version though I really think we should
be more careful.


>
>>
>>>
>>> BTW, I do not mean the change isn't reasonable, but suggest to document
>>> the user visible change, so it can get reviewed from either user
>>> viewpoint and technical point.
>>>
>>>> sleep 4
>>>> done
>>>> }
>>>>
>>>> ublk_test()
>>>> {
>>>> dmesg -C
>>>> echo -e "*** add ublk device ***"
>>>> ./ublk add -t null -d 4 -i 1
>>>> sleep 2
>>>> echo -e "*** start fio ***"
>>>> fio --bs=4k \
>>>> --filename=/dev/ublkb0 \
>>>> --runtime=100s \
>>>> --rw=read &
>>>> sleep 4
>>>> ublk_recover_kill
>>>> wait
>>>> echo -e "*** delete ublk device ***"
>>>> ./ublk del -n 0
>>>> }
>>>>
>>>> for CNT in `seq 4`; do
>>>> modprobe -rv ublk_drv
>>>> modprobe ublk_drv
>>>> echo -e "************ round $CNT ************"
>>>> ublk_test
>>>> sleep 5
>>>> done
>>>> ***************************script***************************
>>>>
>>>> You may run it with our modified ublksrv[3] which supports
>>>> recovey feature. No I/O error occurs and you can verify it
>>>> by typing
>>>> $ perf-tools/bin/tpoint block:block_rq_error
>>>>
>>>> The basic idea of USER_RECOVERY is quite straightfoward:
>>>>
>>>> (1) release/free everything belongs to the dying process.
>>>>
>>>> Note: Since ublk_drv does save information about user process,
>>>> this work is important because we don't expect any resource
>>>> lekage. Particularly, ioucmds from the dying ubq_daemons
>>>> need to be completed(freed). Current ublk_drv code cannot satisfy
>>>> our need while considering USER_RECOVERY. So we refactor some code
>>>> shown in patch 1-5 to gracefully free all ioucmds.
>>>>
>>>> (2) init ublk queues including requeuing/aborting rqs.
>>>>
>>>> (3) allow new ubq_daemons issue FETCH_REQ.
>>>>
>>>> Here is steps to reocver:
>>>>
>>>> (1) For a user, after a process crash(how he detect a crash is not related
>>>> to this patchset), he sends START_USER_RECOVERY ctrl-cmd to
>>>
>>> I'd suggest to describe crash detector a bit at least, as one whole use case,
>>> crash detector should be the input of the use case of user recovery, which is
>>> usually one part of use case when modeling software requirement/design.
>>
>> This patchset tries to answer only one question: After a process crash, how to
>> re-attach the device by another process. So I do not consider other questions
>> too much, such as:
>> (1) How to detect a crash?
>> (2) Is IO hang a crash? Should we kill the process?
>> (3) What if a blk-mq rq timeout? Does the process dies? Should we kill the process?
>
> But you have to define what is 'crash', otherwise how can you define
> what to be recovered?
>
> So far please just define the crash as the whole daemon being dead
> abnormally(without sending stop command) if you don't have better idea.

Yes, I argee that a ublk_drv crash means the whole daemon(process) being dead
abnormally(without sending stop command).

I only consider the 'process' crash, not a single 'pthread'(ubq_daemon) crash.
The process crashes if:

(1) The user kill it(the detector can do this, the backend can do this, or the
ublksrv_tgt can do this...)

(2) It exits because of exception(segfault, divisor error, oom...)

>
>>
>> I think we can answer them after kernel-support of USER_RECOVERY is available.
>>
>>
>> For now I only try to directly kill the process in testcases and manually inject
>> a crash in handle_io_async().
>>
>>>
>>> Such as, crash is detected after the ubq daemon pthread/process is crashed?
>>> Will you consider io hang in the daemon pthread/process? IMO, long-term,
>>> the crash detector utility should be part of ublksrv.
>>
>> Yes, we should design a crash detector in ublksrv. For IO hang, my idea is that:
>>
>> (1) the ublksrv_tgt code should handle it if user runs ublksrv directly.
>>
>> (2) the backend should handle it if user only uses libublksrv and embeds it inside
>> the backend code.
>>
>>>
>>> We don't implement ublk driver's IO timeout yet, but that implementation may be
>>> related with this recovery feature closely, such as, one simple approach is to
>>> kill ubq-daemon if we can't move on after retrying several times, then
>>> let userspace detect & recovery.
>>
>> You mean the ublk_drv can kill the ubq_daemon? I have not consider this case yet...
>>
>> BTW, I don't think we should put too much logic(IO hang, detector) in ublk_drv
>> because it should only pass-through rqs to userpsace. We should make ublk_drv simple.
>> Accept a new daemon and re-attach it to /dev/ublkb0 is what it can do I think.
>
> Actually I was thinking the use case of container-ware ublk device when
> ADMIN privilege requirement can be removed, so people can do whatever
> they want in ublksrv. But sooner or later, request timeout needs to be
> considered for real ublk use case.

Agree.

>
> thanks,
> Ming

\
 
 \ /
  Last update: 2022-08-29 09:29    [W:0.238 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site