lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] doc: dt-binding: mxs-usb-phy: fix fsl,tx-cal-45-dn-ohms max and min value
Date
According to spec:
0000 +19.95%
....
1111 -21.68%

45 * (1 + 19.95%) = 53.9775
45 * (1 - 21.68%) = 35.244

Chanege fsl,tx-cal-45-dn-ohms and fsl,tx-cal-45-dp-ohms range to [35-54]
from [30-55]

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index c9f5c0caf8a9c..111d446b5f986 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -14,10 +14,10 @@ Required properties:
- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series

Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
high-speed trimming resistor connected in parallel with the 45 ohm resistor
that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
high-speed trimming resistor connected in parallel with the 45 ohm resistor
that terminates the DP output signal. Default: 45
- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
--
2.35.1
\
 
 \ /
  Last update: 2022-08-29 17:33    [W:0.044 / U:2.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site