lkml.org 
[lkml]   [2022]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/5] arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors
On Tue, 2 Aug 2022 at 17:40, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The OV7251 and OV8856 camera sensor bindings do not allow
> property "gpios" and Linux driver does not parse it.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Not tested on hardware.
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index b9304f81290a..f313f6964810 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1214,8 +1214,6 @@ camera@10 {
> reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> pinctrl-0 = <&cam0_default>;
> - gpios = <&tlmm 13 0>,
> - <&tlmm 9 GPIO_ACTIVE_LOW>;
>
> clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
> clock-names = "xvclk";
> @@ -1256,8 +1254,6 @@ camera@60 {
> enable-gpios = <&tlmm 21 0>;
> pinctrl-names = "default";
> pinctrl-0 = <&cam3_default>;
> - gpios = <&tlmm 16 0>,
> - <&tlmm 21 0>;
>
> clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
> clock-names = "xclk";
> --
> 2.34.1

Reviewed-by: Robert Foss <robert.foss@linaro.org>

\
 
 \ /
  Last update: 2022-08-29 16:28    [W:0.127 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site