lkml.org 
[lkml]   [2022]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Aw: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
From
On 27/08/2022 11:50, Frank Wunderlich wrote:
> Hi
>
>> Gesendet: Freitag, 26. August 2022 um 08:50 Uhr
>> Von: "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>
>> On 25/08/2022 22:38, Frank Wunderlich wrote:
>>> From: Frank Wunderlich <frank-w@public-files.de>
>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>>> index 93d383b8be87..40b90c052634 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>>> @@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys {
>>> vin-supply = <&dc_12v>;
>>> };
>>>
>>> + pcie30_avdd0v9: pcie30-avdd0v9 {
>>
>> Use consistent naming, so if other nodes have "regulator" suffix, use it
>> here as well.
>
> only these 3 new have the suffix:
>
> vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator
> vcc3v3_minipcie: vcc3v3-minipcie-regulator
> vcc3v3_ngff: vcc3v3-ngff-regulator
>
> so i would drop it there...
>
> so i end up with (including existing ones to compare):
>
> vcc3v3_sys: vcc3v3-sys
> vcc5v0_sys: vcc5v0-sys
> pcie30_avdd0v9: pcie30-avdd0v9
> pcie30_avdd1v8: pcie30-avdd1v8
> vcc3v3_pi6c_05: vcc3v3-pi6c-05
> vcc3v3_minipcie: vcc3v3-minipcie
> vcc3v3_ngff: vcc3v3-ngff
> vcc5v0_usb: vcc5v0_usb
> vcc5v0_usb_host: vcc5v0-usb-host
> vcc5v0_usb_otg: vcc5v0-usb-otg
>
> is this ok?
>
> maybe swap avdd* and pcie30 part to have voltage in front of function.
>

I prefer all of them have regulator suffix. I think reasonable is also
to rename the old ones and then add new ones with suffix.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-27 10:57    [W:0.597 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site