lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] clk: qcom: gcc-sc7280: Keep the USB GDSCs always on
On Fri, Aug 26, 2022 at 09:16:38AM +0200, Johan Hovold wrote:
> On Thu, Aug 25, 2022 at 06:21:59PM -0700, Matthias Kaehlcke wrote:
> > When the GDSC is disabled during system suspend USB is broken on
> > sc7280 when the system resumes. Mark the GDSC as always on to
> > make sure USB still works after system suspend.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > ---
> >
> > Changes in v2:
> > - set the flags of the GDSC not of the GDSC power domain
> > - updated commit message
> >
> > drivers/clk/qcom/gcc-sc7280.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
> > index 7ff64d4d5920..adef68d2cb0b 100644
> > --- a/drivers/clk/qcom/gcc-sc7280.c
> > +++ b/drivers/clk/qcom/gcc-sc7280.c
>
> Perhaps you can add a comment here about why this is needed similar to
> what I did for sc8280xp:
>
> https://lore.kernel.org/all/20220805121250.10347-3-johan+linaro@kernel.org/

From Bjorn's comment on the sc7180 patch it seems it's not an dwc3
implementation issue. IIUC the GDSCs should have a retention state
that would be used during suspend.

> > @@ -3127,7 +3127,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
> > .name = "gcc_usb30_prim_gdsc",
> > },
> > .pwrsts = PWRSTS_OFF_ON,
> > - .flags = VOTABLE,
> > + .flags = VOTABLE | ALWAYS_ON,
> > };
> >
> > static struct gdsc gcc_usb30_sec_gdsc = {
>
> Look good otherwise. For both patches:
>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

Thanks!

\
 
 \ /
  Last update: 2022-08-26 17:19    [W:0.250 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site