lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v5 06/44] kmsan: add ReST documentation
From
Add Documentation/dev-tools/kmsan.rst and reference it in the dev-tools
index.

Signed-off-by: Alexander Potapenko <glider@google.com>
---
v2:
-- added a note that KMSAN is not intended for production use

v5:
-- mention CONFIG_KMSAN_CHECK_PARAM_RETVAL, drop mentions of cpu_entry_area
-- add SPDX license
-- address Marco Elver's comments: reorganize doc structure, fix minor
nits

Link: https://linux-review.googlesource.com/id/I751586f79418b95550a83c6035c650b5b01567cc
---
Documentation/dev-tools/index.rst | 1 +
Documentation/dev-tools/kmsan.rst | 427 ++++++++++++++++++++++++++++++
2 files changed, 428 insertions(+)
create mode 100644 Documentation/dev-tools/kmsan.rst

diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
index 4621eac290f46..6b0663075dc04 100644
--- a/Documentation/dev-tools/index.rst
+++ b/Documentation/dev-tools/index.rst
@@ -24,6 +24,7 @@ Documentation/dev-tools/testing-overview.rst
kcov
gcov
kasan
+ kmsan
ubsan
kmemleak
kcsan
diff --git a/Documentation/dev-tools/kmsan.rst b/Documentation/dev-tools/kmsan.rst
new file mode 100644
index 0000000000000..2a53a801198cb
--- /dev/null
+++ b/Documentation/dev-tools/kmsan.rst
@@ -0,0 +1,427 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2022, Google LLC.
+
+===================================
+The Kernel Memory Sanitizer (KMSAN)
+===================================
+
+KMSAN is a dynamic error detector aimed at finding uses of uninitialized
+values. It is based on compiler instrumentation, and is quite similar to the
+userspace `MemorySanitizer tool`_.
+
+An important note is that KMSAN is not intended for production use, because it
+drastically increases kernel memory footprint and slows the whole system down.
+
+Usage
+=====
+
+Building the kernel
+-------------------
+
+In order to build a kernel with KMSAN you will need a fresh Clang (14.0.6+).
+Please refer to `LLVM documentation`_ for the instructions on how to build Clang.
+
+Now configure and build the kernel with CONFIG_KMSAN enabled.
+
+Example report
+--------------
+
+Here is an example of a KMSAN report::
+
+ =====================================================
+ BUG: KMSAN: uninit-value in test_uninit_kmsan_check_memory+0x1be/0x380 [kmsan_test]
+ test_uninit_kmsan_check_memory+0x1be/0x380 mm/kmsan/kmsan_test.c:273
+ kunit_run_case_internal lib/kunit/test.c:333
+ kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374
+ kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28
+ kthread+0x721/0x850 kernel/kthread.c:327
+ ret_from_fork+0x1f/0x30 ??:?
+
+ Uninit was stored to memory at:
+ do_uninit_local_array+0xfa/0x110 mm/kmsan/kmsan_test.c:260
+ test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271
+ kunit_run_case_internal lib/kunit/test.c:333
+ kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374
+ kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28
+ kthread+0x721/0x850 kernel/kthread.c:327
+ ret_from_fork+0x1f/0x30 ??:?
+
+ Local variable uninit created at:
+ do_uninit_local_array+0x4a/0x110 mm/kmsan/kmsan_test.c:256
+ test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271
+
+ Bytes 4-7 of 8 are uninitialized
+ Memory access of size 8 starts at ffff888083fe3da0
+
+ CPU: 0 PID: 6731 Comm: kunit_try_catch Tainted: G B E 5.16.0-rc3+ #104
+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
+ =====================================================
+
+The report says that the local variable ``uninit`` was created uninitialized in
+``do_uninit_local_array()``. The third stack trace corresponds to the place
+where this variable was created.
+
+The first stack trace shows where the uninit value was used (in
+``test_uninit_kmsan_check_memory()``). The tool shows the bytes which were left
+uninitialized in the local variable, as well as the stack where the value was
+copied to another memory location before use.
+
+A use of uninitialized value ``v`` is reported by KMSAN in the following cases:
+ - in a condition, e.g. ``if (v) { ... }``;
+ - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``;
+ - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``;
+ - when it is passed as an argument to a function, and
+ ``CONFIG_KMSAN_CHECK_PARAM_RETVAL`` is enabled (see below).
+
+The mentioned cases (apart from copying data to userspace or hardware, which is
+a security issue) are considered undefined behavior from the C11 Standard point
+of view.
+
+Disabling the instrumentation
+-----------------------------
+
+A function can be marked with ``__no_kmsan_checks``. Doing so makes KMSAN
+ignore uninitialized values in that function and mark its output as initialized.
+As a result, the user will not get KMSAN reports related to that function.
+
+Another function attribute supported by KMSAN is ``__no_sanitize_memory``.
+Applying this attribute to a function will result in KMSAN not instrumenting
+it, which can be helpful if we do not want the compiler to interfere with some
+low-level code (e.g. that marked with ``noinstr`` which implicitly adds
+``__no_sanitize_memory``).
+
+This however comes at a cost: stack allocations from such functions will have
+incorrect shadow/origin values, likely leading to false positives. Functions
+called from non-instrumented code may also receive incorrect metadata for their
+parameters.
+
+As a rule of thumb, avoid using ``__no_sanitize_memory`` explicitly.
+
+It is also possible to disable KMSAN for a single file (e.g. main.o)::
+
+ KMSAN_SANITIZE_main.o := n
+
+or for the whole directory::
+
+ KMSAN_SANITIZE := n
+
+in the Makefile. Think of this as applying ``__no_sanitize_memory`` to every
+function in the file or directory. Most users won't need KMSAN_SANITIZE, unless
+their code gets broken by KMSAN (e.g. runs at early boot time).
+
+Support
+=======
+
+In order for KMSAN to work the kernel must be built with Clang, which so far is
+the only compiler that has KMSAN support. The kernel instrumentation pass is
+based on the userspace `MemorySanitizer tool`_.
+
+The runtime library only supports x86_64 at the moment.
+
+How KMSAN works
+===============
+
+KMSAN shadow memory
+-------------------
+
+KMSAN associates a metadata byte (also called shadow byte) with every byte of
+kernel memory. A bit in the shadow byte is set iff the corresponding bit of the
+kernel memory byte is uninitialized. Marking the memory uninitialized (i.e.
+setting its shadow bytes to ``0xff``) is called poisoning, marking it
+initialized (setting the shadow bytes to ``0x00``) is called unpoisoning.
+
+When a new variable is allocated on the stack, it is poisoned by default by
+instrumentation code inserted by the compiler (unless it is a stack variable
+that is immediately initialized). Any new heap allocation done without
+``__GFP_ZERO`` is also poisoned.
+
+Compiler instrumentation also tracks the shadow values as they are used along
+the code. When needed, instrumentation code invokes the runtime library in
+``mm/kmsan/`` to persist shadow values.
+
+The shadow value of a basic or compound type is an array of bytes of the same
+length. When a constant value is written into memory, that memory is unpoisoned.
+When a value is read from memory, its shadow memory is also obtained and
+propagated into all the operations which use that value. For every instruction
+that takes one or more values the compiler generates code that calculates the
+shadow of the result depending on those values and their shadows.
+
+Example::
+
+ int a = 0xff; // i.e. 0x000000ff
+ int b;
+ int c = a | b;
+
+In this case the shadow of ``a`` is ``0``, shadow of ``b`` is ``0xffffffff``,
+shadow of ``c`` is ``0xffffff00``. This means that the upper three bytes of
+``c`` are uninitialized, while the lower byte is initialized.
+
+Origin tracking
+---------------
+
+Every four bytes of kernel memory also have a so-called origin mapped to them.
+This origin describes the point in program execution at which the uninitialized
+value was created. Every origin is associated with either the full allocation
+stack (for heap-allocated memory), or the function containing the uninitialized
+variable (for locals).
+
+When an uninitialized variable is allocated on stack or heap, a new origin
+value is created, and that variable's origin is filled with that value. When a
+value is read from memory, its origin is also read and kept together with the
+shadow. For every instruction that takes one or more values, the origin of the
+result is one of the origins corresponding to any of the uninitialized inputs.
+If a poisoned value is written into memory, its origin is written to the
+corresponding storage as well.
+
+Example 1::
+
+ int a = 42;
+ int b;
+ int c = a + b;
+
+In this case the origin of ``b`` is generated upon function entry, and is
+stored to the origin of ``c`` right before the addition result is written into
+memory.
+
+Several variables may share the same origin address, if they are stored in the
+same four-byte chunk. In this case every write to either variable updates the
+origin for all of them. We have to sacrifice precision in this case, because
+storing origins for individual bits (and even bytes) would be too costly.
+
+Example 2::
+
+ int combine(short a, short b) {
+ union ret_t {
+ int i;
+ short s[2];
+ } ret;
+ ret.s[0] = a;
+ ret.s[1] = b;
+ return ret.i;
+ }
+
+If ``a`` is initialized and ``b`` is not, the shadow of the result would be
+0xffff0000, and the origin of the result would be the origin of ``b``.
+``ret.s[0]`` would have the same origin, but it will never be used, because
+that variable is initialized.
+
+If both function arguments are uninitialized, only the origin of the second
+argument is preserved.
+
+Origin chaining
+~~~~~~~~~~~~~~~
+
+To ease debugging, KMSAN creates a new origin for every store of an
+uninitialized value to memory. The new origin references both its creation stack
+and the previous origin the value had. This may cause increased memory
+consumption, so we limit the length of origin chains in the runtime.
+
+Clang instrumentation API
+-------------------------
+
+Clang instrumentation pass inserts calls to functions defined in
+``mm/kmsan/nstrumentation.c`` into the kernel code.
+
+Shadow manipulation
+~~~~~~~~~~~~~~~~~~~
+
+For every memory access the compiler emits a call to a function that returns a
+pair of pointers to the shadow and origin addresses of the given memory::
+
+ typedef struct {
+ void *shadow, *origin;
+ } shadow_origin_ptr_t
+
+ shadow_origin_ptr_t __msan_metadata_ptr_for_load_{1,2,4,8}(void *addr)
+ shadow_origin_ptr_t __msan_metadata_ptr_for_store_{1,2,4,8}(void *addr)
+ shadow_origin_ptr_t __msan_metadata_ptr_for_load_n(void *addr, uintptr_t size)
+ shadow_origin_ptr_t __msan_metadata_ptr_for_store_n(void *addr, uintptr_t size)
+
+The function name depends on the memory access size.
+
+The compiler makes sure that for every loaded value its shadow and origin
+values are read from memory. When a value is stored to memory, its shadow and
+origin are also stored using the metadata pointers.
+
+Handling locals
+~~~~~~~~~~~~~~~
+
+A special function is used to create a new origin value for a local variable and
+set the origin of that variable to that value::
+
+ void __msan_poison_alloca(void *addr, uintptr_t size, char *descr)
+
+Access to per-task data
+~~~~~~~~~~~~~~~~~~~~~~~
+
+At the beginning of every instrumented function KMSAN inserts a call to
+``__msan_get_context_state()``::
+
+ kmsan_context_state *__msan_get_context_state(void)
+
+``kmsan_context_state`` is declared in ``include/linux/kmsan.h``::
+
+ struct kmsan_context_state {
+ char param_tls[KMSAN_PARAM_SIZE];
+ char retval_tls[KMSAN_RETVAL_SIZE];
+ char va_arg_tls[KMSAN_PARAM_SIZE];
+ char va_arg_origin_tls[KMSAN_PARAM_SIZE];
+ u64 va_arg_overflow_size_tls;
+ char param_origin_tls[KMSAN_PARAM_SIZE];
+ depot_stack_handle_t retval_origin_tls;
+ };
+
+This structure is used by KMSAN to pass parameter shadows and origins between
+instrumented functions (unless the parameters are checked immediately by
+``CONFIG_KMSAN_CHECK_PARAM_RETVAL``).
+
+Passing uninitialized values to functions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Clang's MemorySanitizer instrumentation has an option,
+``-fsanitize-memory-param-retval``, which makes the compiler check function
+parameters passed by value, as well as function return values.
+
+The option is controlled by ``CONFIG_KMSAN_CHECK_PARAM_RETVAL``, which is
+enabled by default to let KMSAN report uninitialized values earlier.
+Please refer to the `LKML discussion`_ for more details.
+
+Because of the way the checks are implemented in LLVM (they are only applied to
+parameters marked as ``noundef``), not all parameters are guaranteed to be
+checked, so we cannot give up the metadata storage in ``kmsan_context_state``.
+
+String functions
+~~~~~~~~~~~~~~~~
+
+The compiler replaces calls to ``memcpy()``/``memmove()``/``memset()`` with the
+following functions. These functions are also called when data structures are
+initialized or copied, making sure shadow and origin values are copied alongside
+with the data::
+
+ void *__msan_memcpy(void *dst, void *src, uintptr_t n)
+ void *__msan_memmove(void *dst, void *src, uintptr_t n)
+ void *__msan_memset(void *dst, int c, uintptr_t n)
+
+Error reporting
+~~~~~~~~~~~~~~~
+
+For each use of a value the compiler emits a shadow check that calls
+``__msan_warning()`` in the case that value is poisoned::
+
+ void __msan_warning(u32 origin)
+
+``__msan_warning()`` causes KMSAN runtime to print an error report.
+
+Inline assembly instrumentation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+KMSAN instruments every inline assembly output with a call to::
+
+ void __msan_instrument_asm_store(void *addr, uintptr_t size)
+
+, which unpoisons the memory region.
+
+This approach may mask certain errors, but it also helps to avoid a lot of
+false positives in bitwise operations, atomics etc.
+
+Sometimes the pointers passed into inline assembly do not point to valid memory.
+In such cases they are ignored at runtime.
+
+
+Runtime library
+---------------
+
+The code is located in ``mm/kmsan/``.
+
+Per-task KMSAN state
+~~~~~~~~~~~~~~~~~~~~
+
+Every task_struct has an associated KMSAN task state that holds the KMSAN
+context (see above) and a per-task flag disallowing KMSAN reports::
+
+ struct kmsan_context {
+ ...
+ bool allow_reporting;
+ struct kmsan_context_state cstate;
+ ...
+ }
+
+ struct task_struct {
+ ...
+ struct kmsan_context kmsan;
+ ...
+ }
+
+KMSAN contexts
+~~~~~~~~~~~~~~
+
+When running in a kernel task context, KMSAN uses ``current->kmsan.cstate`` to
+hold the metadata for function parameters and return values.
+
+But in the case the kernel is running in the interrupt, softirq or NMI context,
+where ``current`` is unavailable, KMSAN switches to per-cpu interrupt state::
+
+ DEFINE_PER_CPU(struct kmsan_ctx, kmsan_percpu_ctx);
+
+Metadata allocation
+~~~~~~~~~~~~~~~~~~~
+
+There are several places in the kernel for which the metadata is stored.
+
+1. Each ``struct page`` instance contains two pointers to its shadow and
+origin pages::
+
+ struct page {
+ ...
+ struct page *shadow, *origin;
+ ...
+ };
+
+At boot-time, the kernel allocates shadow and origin pages for every available
+kernel page. This is done quite late, when the kernel address space is already
+fragmented, so normal data pages may arbitrarily interleave with the metadata
+pages.
+
+This means that in general for two contiguous memory pages their shadow/origin
+pages may not be contiguous. Consequently, if a memory access crosses the
+boundary of a memory block, accesses to shadow/origin memory may potentially
+corrupt other pages or read incorrect values from them.
+
+In practice, contiguous memory pages returned by the same ``alloc_pages()``
+call will have contiguous metadata, whereas if these pages belong to two
+different allocations their metadata pages can be fragmented.
+
+For the kernel data (``.data``, ``.bss`` etc.) and percpu memory regions
+there also are no guarantees on metadata contiguity.
+
+In the case ``__msan_metadata_ptr_for_XXX_YYY()`` hits the border between two
+pages with non-contiguous metadata, it returns pointers to fake shadow/origin regions::
+
+ char dummy_load_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+ char dummy_store_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+
+``dummy_load_page`` is zero-initialized, so reads from it always yield zeroes.
+All stores to ``dummy_store_page`` are ignored.
+
+2. For vmalloc memory and modules, there is a direct mapping between the memory
+range, its shadow and origin. KMSAN reduces the vmalloc area by 3/4, making only
+the first quarter available to ``vmalloc()``. The second quarter of the vmalloc
+area contains shadow memory for the first quarter, the third one holds the
+origins. A small part of the fourth quarter contains shadow and origins for the
+kernel modules. Please refer to ``arch/x86/include/asm/pgtable_64_types.h`` for
+more details.
+
+When an array of pages is mapped into a contiguous virtual memory space, their
+shadow and origin pages are similarly mapped into contiguous regions.
+
+References
+==========
+
+E. Stepanov, K. Serebryany. `MemorySanitizer: fast detector of uninitialized
+memory use in C++
+<https://static.googleusercontent.com/media/research.google.com/en//pubs/archive/43308.pdf>`_.
+In Proceedings of CGO 2015.
+
+.. _MemorySanitizer tool: https://clang.llvm.org/docs/MemorySanitizer.html
+.. _LLVM documentation: https://llvm.org/docs/GettingStarted.html
+.. _LKML discussion: https://lore.kernel.org/all/20220614144853.3693273-1-glider@google.com/
--
2.37.2.672.g94769d06f0-goog
\
 
 \ /
  Last update: 2022-08-26 17:10    [W:0.218 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site