lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] clk: qcom: gcc-sc7280: Keep USB GDSC power domains on when USB wakeup is enabled
On Fri, Aug 26, 2022 at 06:24:37AM -0700, Matthias Kaehlcke wrote:
> On Fri, Aug 26, 2022 at 06:19:37AM -0700, Matthias Kaehlcke wrote:
> > On Fri, Aug 26, 2022 at 03:12:05PM +0200, Johan Hovold wrote:
> > > On Fri, Aug 26, 2022 at 06:05:19AM -0700, Matthias Kaehlcke wrote:
> > > > On Thu, Aug 25, 2022 at 03:16:58PM -0700, Matthias Kaehlcke wrote:
> > > > > On Wed, Aug 24, 2022 at 10:47:44AM +0200, Johan Hovold wrote:
> > >
> > > > > > The wakeup setting doesn't seem to have anything to do with the genpd
> > > > > > issues on sc8280xp and the controller doesn't resume properly regardless
> > > > > > of whether the PHYs have been disabled or not during suspend unless the
> > > > > > PD is left on.
> > > > >
> > > > > I'm essentially seeing the same. USB is hosed after resume unless the PD
> > > > > is left on.
> > > > >
> > > > > On Chrome OS we currently work around that with a version of commit
> > > > > d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller
> > > > > status") which was reverted upstream. I'm not sure whether USB worked after
> > > > > resume before we enabled wakeup support. I would have sworn it did, but we
> > > > > landed an old version of the wakeup patches a long time ago, so my
> > > > > memory might be failing me.
> > > >
> > > > I need to remind myself that keeping the GDSC on is only needed when the PHYs
> > > > are kept on. The PHYs were always off before wakeup support was added, which
> > > > is why USB wasn't broken after suspend in the pre-wakeup days.
> > >
> > > Ok, so to be clear: if you disable wakeup with my patches applied so
> > > that the PD is actually turned off, USB still resumes with only
> > > GENPD_FLAG_ACTIVE_WAKEUP set?
>
> Actually without GENPD_FLAG_ACTIVE_WAKEUP

Sure, that only comes into play with wakeup enabled. I assume you still
need it for USB wakeup to work?

Johan

\
 
 \ /
  Last update: 2022-08-26 15:27    [W:0.054 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site