lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v4 17/17] net: dsa: microchip: remove IS_9893 flag
Date
Use chip_id as other places of this code do it

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
drivers/net/dsa/microchip/ksz9477.c | 3 ---
drivers/net/dsa/microchip/ksz_common.c | 3 ++-
drivers/net/dsa/microchip/ksz_common.h | 4 ----
3 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 077b4e5c29c7c..42d7e4c124594 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1164,9 +1164,6 @@ int ksz9477_switch_init(struct ksz_device *dev)
if (ret)
return ret;

- if (dev->chip_id == KSZ9893_CHIP_ID)
- dev->features |= IS_9893;
-
return 0;
}

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7eb74ab049336..37fb5ba2cd7ad 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1912,7 +1912,8 @@ static void ksz_set_xmii(struct ksz_device *dev, int port,
case PHY_INTERFACE_MODE_RGMII_RXID:
data8 |= bitval[P_RGMII_SEL];
/* On KSZ9893, disable RGMII in-band status support */
- if (dev->features & IS_9893)
+ if (dev->chip_id == KSZ9893_CHIP_ID ||
+ dev->chip_id == KSZ8563_CHIP_ID)
data8 &= ~P_MII_MAC_MODE;
break;
default:
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 4914cc1c803a4..c01989c04d4e3 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -119,7 +119,6 @@ struct ksz_device {
unsigned long mib_read_interval;
u16 mirror_rx;
u16 mirror_tx;
- u32 features; /* chip specific features */
u16 port_mask;
};

@@ -542,9 +541,6 @@ static inline int is_lan937x(struct ksz_device *dev)

#define SW_START 0x01

-/* Used with variable features to indicate capabilities. */
-#define IS_9893 BIT(2)
-
/* xMII configuration */
#define P_MII_DUPLEX_M BIT(6)
#define P_MII_100MBIT_M BIT(4)
--
2.30.2
\
 
 \ /
  Last update: 2022-08-26 12:58    [W:0.547 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site