lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH] usb: core: stop USB enumeration if too many retries
From
If a broken accessory connected to a USB host, usbcore might
keep doing enumeration retries and it will take a long time to
cause system unstable.

This patch provides a quirk to specific USB ports of the hub to
stop USB enumeration if needed.

Signed-off-by: Ray Chi <raychi@google.com>
---
drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++
include/linux/usb.h | 3 +++
2 files changed, 36 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2633acde7ac1..0f4097440ffb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3081,6 +3081,28 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
return status;
}

+/* Stop enumerate if the port met errors and quirk is set */
+static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+
+ if (retries < (PORT_INIT_TRIES - 1) / 2)
+ return false;
+
+ /*
+ * Some USB hosts can't take a long time to keep doing enumeration
+ * retry. After doing half of the retries, we would turn off the port
+ * power to stop enumeration if the quirk is set.
+ */
+ if (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM) {
+ usb_hub_set_port_power(hdev, hub, port1, false);
+ return true;
+ }
+
+ return false;
+}
+
/* Check if a port is power on */
int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
{
@@ -4855,6 +4877,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
buf->bMaxPacketSize0;
kfree(buf);

+ if (r < 0 && (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM))
+ goto fail;
+
retval = hub_port_reset(hub, port1, udev, delay, false);
if (retval < 0) /* error or disconnect */
goto fail;
@@ -5387,6 +5412,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;

+ if (hub_port_stop_enumerate(hub, port1, i))
+ break;
+
/* When halfway through our retry count, power-cycle the port */
if (i == (PORT_INIT_TRIES - 1) / 2) {
dev_info(&port_dev->dev, "attempt power cycle\n");
@@ -5934,6 +5962,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
ret = hub_port_init(parent_hub, udev, port1, i);
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
+
+ if (hub_port_stop_enumerate(parent_hub, port1, i))
+ goto stop_enumerate;
}
mutex_unlock(hcd->address0_mutex);

@@ -6022,6 +6053,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
udev->bos = bos;
return 0;

+stop_enumerate:
+ mutex_unlock(hcd->address0_mutex);
re_enumerate:
usb_release_bos_descriptor(udev);
udev->bos = bos;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index f7a9914fc97f..fc0fef58c706 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -490,6 +490,9 @@ enum usb_port_connect_type {
/* Decrease TRSTRCY to 10ms during device enumeration. */
#define USB_PORT_QUIRK_FAST_ENUM BIT(1)

+/* Stop the enumeration for the given port if there are too many failures*/
+#define USB_PORT_QUIRK_STOP_ENUM BIT(2)
+
/*
* USB 2.0 Link Power Management (LPM) parameters.
*/
--
2.37.2.672.g94769d06f0-goog
\
 
 \ /
  Last update: 2022-08-26 09:59    [W:0.074 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site