lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/8] Documentation: KUnit: Reword start guide for selecting tests
On Mon, Aug 22, 2022 at 10:30 AM Tales Aparecida
<tales.aparecida@gmail.com> wrote:
>
> Reword "Creating a ``.kunitconfig``" into "Selecting which tests to run"
> covering the current alternatives for editing configs and glob-filtering
>
> Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
> Reviewed-by: Maíra Canal <mairacanal@riseup.net>
>
> ---
> Notes:
> Avoid hyphen in "test case" and "test suite"
> Fix nit: "any test case that match" -> "...matches"
> ---

Thanks very much: I quite like this, more detailed, description.

I'd prefer we tell people explicitly to use ".kunitconfig" files
rather than "using Kconfig": personally I find the latter is a bit
ambiguous as to which files are being changed, and whether or not
you're changing things using .kunitconfig files, or be directly
modifying .config. "Cutomizing Kconfig" suggests the latter to me.
Though it is a little awkward to call it kunitconfig when doing the
--kconfig_add options, too, so if you'd really prefer it as-is, I'll
live with it.

Other than that, though, I'm really happy with this change. I do think
it's starting to push against the edges of the "Getting Started"
guide: I think if we wanted anything more complicated than this, it'd
be best to just link to the run_wrapper.rst page, but this seems good.

Reviewed-by: David Gow <davidgow@google.com>

Cheers,
-- David

> Documentation/dev-tools/kunit/start.rst | 90 +++++++++++++++++--------
> 1 file changed, 63 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
> index 9beec7d6ac4b..adf782507999 100644
> --- a/Documentation/dev-tools/kunit/start.rst
> +++ b/Documentation/dev-tools/kunit/start.rst
> @@ -52,27 +52,20 @@ The tests will pass or fail.
> For detailed information on this wrapper, see:
> Documentation/dev-tools/kunit/run_wrapper.rst.
>
> -Creating a ``.kunitconfig``
> ----------------------------
> -
> -By default, kunit_tool runs a selection of tests. However, you can specify which
> -unit tests to run by creating a ``.kunitconfig`` file with kernel config options
> -that enable only a specific set of tests and their dependencies.
> -The ``.kunitconfig`` file contains a list of kconfig options which are required
> -to run the desired targets. The ``.kunitconfig`` also contains any other test
> -specific config options, such as test dependencies. For example: the
> -``FAT_FS`` tests - ``FAT_KUNIT_TEST``, depends on
> -``FAT_FS``. ``FAT_FS`` can be enabled by selecting either ``MSDOS_FS``
> -or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has:
> +Selecting which tests to run
> +----------------------------
>
> -.. code-block:: none
> +By default, kunit_tool runs all tests reachable with minimal configuration,
> +that is, using default values for most of the kconfig options. However,
> +you can select which tests to run by:
>
> - CONFIG_KUNIT=y
> - CONFIG_MSDOS_FS=y
> - CONFIG_FAT_KUNIT_TEST=y
> +- `Customizing Kconfig`_ used to compile the kernel, or
> +- `Filtering tests by name`_ to select specifically which compiled tests to run.
>
> -1. A good starting point for the ``.kunitconfig`` is the KUnit default config.
> - You can generate it by running:
> +Customizing Kconfig
> +~~~~~~~~~~~~~~~~~~~
> +A good starting point for the ``.kunitconfig`` is the KUnit default config.
> +If you didn't run ``kunit.py run`` yet, you can generate it by running:
>
> .. code-block:: bash
>
> @@ -84,27 +77,70 @@ or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has:
> ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is
> ``.kunit`` by default.
>
> -.. note ::
> +Before running the tests, kunit_tool ensures that all config options
> +set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn
> +you if you have not included dependencies for the options used.
> +
> +There are many ways to customize the configurations:
> +
> +a. Edit ``.kunit/.kunitconfig``. The file should contain the list of kconfig
> + options required to run the desired tests, including their dependencies.
> You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as
> it will enable a number of additional tests that you may not want.
> + If you need to run on an architecture other than UML see :ref:`kunit-on-qemu`.
>
> -2. You can then add any other Kconfig options, for example:
> +b. Enable additional kconfig options on top of ``.kunit/.kunitconfig``.
> + For example, to include the kernel's linked-list test you can run::
>
> -.. code-block:: none
> + ./tools/testing/kunit/kunit.py run \
> + --kconfig_add CONFIG_LIST_KUNIT_TEST=y
>
> - CONFIG_LIST_KUNIT_TEST=y
> +c. Provide the path of one or more .kunitconfig files from the tree.
> + For example, to run only ``FAT_FS`` and ``EXT4`` tests you can run::
>
> -Before running the tests, kunit_tool ensures that all config options
> -set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn
> -you if you have not included dependencies for the options used.
> + ./tools/testing/kunit/kunit.py run \
> + --kunitconfig ./fs/fat/.kunitconfig \
> + --kunitconfig ./fs/ext4/.kunitconfig
>
> -.. note ::
> - If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the
> +d. If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the
> ``.config`` file. But you can edit the ``.config`` file directly or with
> tools like ``make menuconfig O=.kunit``. As long as its a superset of
> ``.kunitconfig``, kunit.py won't overwrite your changes.
>
>
> +.. note ::
> +
> + To save a .kunitconfig after finding a satisfactory configuration::
> +
> + make savedefconfig O=.kunit
> + cp .kunit/defconfig .kunit/.kunitconfig
> +
> +Filtering tests by name
> +~~~~~~~~~~~~~~~~~~~~~~~
> +If you want to be more specific than Kconfig can provide, it is also possible
> +to select which tests to execute at boot-time by passing a glob filter
> +(read instructions regarding the pattern in the manpage :manpage:`glob(7)`).
> +If there is a ``"."`` (period) in the filter, it will be interpreted as a
> +separator between the name of the test suite and the test case,
> +otherwise, it will be interpreted as the name of the test suite.
> +For example, let's assume we are using the default config:
> +
> +a. inform the name of a test suite, like ``"kunit_executor_test"``,
> + to run every test case it contains::
> +
> + ./tools/testing/kunit/kunit.py run "kunit_executor_test"
> +
> +b. inform the name of a test case prefixed by its test suite,
> + like ``"example.example_simple_test"``, to run specifically that test case::
> +
> + ./tools/testing/kunit/kunit.py run "example.example_simple_test"
> +
> +c. use wildcard characters (``*?[``) to run any test case that matches the pattern,
> + like ``"*.*64*"`` to run test cases containing ``"64"`` in the name inside
> + any test suite::
> +
> + ./tools/testing/kunit/kunit.py run "*.*64*"
> +

Another interesting distinction is that filtering tests can be done
without using kunit_tool, though that's probably out-of-scope for the
Getting Started documentation.


> Running Tests without the KUnit Wrapper
> =======================================
> If you do not want to use the KUnit Wrapper (for example: you want code
> --
> 2.37.2
>
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2022-08-26 09:31    [W:0.098 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site