lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
From


On 25.08.2022 18:41, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad

>
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index ba547ca9fc6b..ddb9cb182152 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
>
> regulator-always-on;
> regulator-boot-on;
> - regulator-allow-set-load;
>
> vin-supply = <&vreg_3p3>;
> };
> @@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7a_1p8: ldo7 {
> @@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l11a_0p8: ldo11 {
> @@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_1p8: ldo7 {
> @@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {

\
 
 \ /
  Last update: 2022-08-26 20:49    [W:0.209 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site