lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
From
On 25/08/2022 22:38, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
>
> Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
> set PCIe related regulators to always on.
>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v5:
> - rebase on 6.0-rc1
> - add pinctrl for pcie
> - fix ngff pwr_en_h gpio for hw ref 1.1
>
> v4:
> - change u8 lane-map to u32 data-lanes
>
> v3:
> - squash lane-map over bifurcation property
> - add comment which slot is M2 and which one if mPCIe
> - fixes from Peter:
> - drop regulator-always-on/regulator-boot-on from regulators
> - increase startup-delay-us for regulators
> - set phy-mode on PCIe3-phy
> - add num-lanes to PCIe overrides
> - add usb node for to PCIe/m2
> - move lane-map from PCIe controller to PCIe-phy
>
> v2:
> - underscores in nodenames
> - rockchip,bifurcation to vendor unspecific bifurcation
> - fix trailing space
> ---
> .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 117 ++++++++++++++++++
> 1 file changed, 117 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> index 93d383b8be87..40b90c052634 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> @@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys {
> vin-supply = <&dc_12v>;
> };
>
> + pcie30_avdd0v9: pcie30-avdd0v9 {

Use consistent naming, so if other nodes have "regulator" suffix, use it
here as well.

> + compatible = "regulator-fixed";
> + regulator-name = "pcie30_avdd0v9";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + pcie30_avdd1v8: pcie30-avdd1v8 {

Ditto.


> + compatible = "regulator-fixed";
> + regulator-name = "pcie30_avdd1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + /* pi6c pcie clock generator feeds both ports */
> + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_pcie";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <200000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-26 08:52    [W:1.323 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site