lkml.org 
[lkml]   [2022]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] drm/bridge: sii902x: add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR
On Wed, Aug 17, 2022 at 3:31 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 15/08/2022 02:15, Dmitry Osipenko wrote:
> > 08.08.2022 12:51, Neil Armstrong пишет:
> >> On 08/08/2022 11:15, Neil Armstrong wrote:

> >>>> This patch broke ARM/QEMU vexpress display because of_drm_find_bridge()
> >>>> always fail with -EPROBE_DEFER. Reverting this patch returns display
> >>>> back. Please fix or revert, thanks in advance.
> >>>
> >>> Can you share a QEMU cmdline to reproduce ?
> >>
> >> Actually the vexpress DT has multiple input ports instead of a single
> >> input port at @0
> >> and an output port at @1 like documented in the bindings:
> >>
> >> vexpress-v2m.dtsi#L303-L307:
> >> ports {
> >> #address-cells = <1>;
> >> #size-cells = <0>;
> >>
> >> /*
> >> * Both the core tile and the motherboard routes their output
> >> * pads to this transmitter. The motherboard system controller
> >> * can select one of them as input using a mux register in
> >> * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
> >> * the only platform with this specific set-up.
> >> */
> >> port@0 {
> >> reg = <0>;
> >> dvi_bridge_in_ct: endpoint {
> >> remote-endpoint = <&clcd_pads_ct>;
> >> };
> >> };
> >> port@1 {
> >> reg = <1>;
> >> dvi_bridge_in_mb: endpoint {
> >> remote-endpoint = <&clcd_pads_mb>;
> >> };
> >> };
> >> };
> >>
> >> bindings:
> >> ports:
> >> $ref: /schemas/graph.yaml#/properties/ports
> >>
> >> properties:
> >> port@0:
> >> $ref: /schemas/graph.yaml#/properties/port
> >> description: Parallel RGB input port
> >>
> >> port@1:
> >> $ref: /schemas/graph.yaml#/properties/port
> >> description: HDMI output port
> >>
> >> port@3:
> >> $ref: /schemas/graph.yaml#/properties/port
> >> description: Sound input port
> >>
> >> The patch is conform to the bindings, the DT was working but is actually
> >> not valid.
> >
> > I haven't looked closely at how to fix this properly, but if we can fix
> > it using of_machine_is_compatible("arm,vexpress") workaround in the
> > driver, then it will be good enough at least as a temporal fix, IMO.
>
> If other maintainers are ok with that, it can be temporary fix until the DT gets fixed.

That's fine with me, will you send a patch?

I don't know how you expect the DT to get "fixed" though.

The hardware looks like this, it's maybe not the most elegant
electronics design but it exists, so... I wrote this DT with two
inputs, see commit f1fe12c8bf332, the code handling this
awkward mux is part of the DRM driver, see
drivers/gpu/drm/pl111/pl111_versatile.c function
pl111_vexpress_clcd_init() for an idea of how it works.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2022-08-25 14:49    [W:0.088 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site