Messages in this thread Patch in this message | | | From | Liao Chang <> | Subject | [PATCH 1/2] genirq: Record dangling hwirq number into struct irq_data | Date | Thu, 25 Aug 2022 14:08:18 +0800 |
| |
Following interrupt allocation process lead to some interrupts are mapped in the low-level domain(Arm ITS), but they are never been mapped at the higher level.
irq_domain_alloc_irqs_hierarchy(.., nr_irqs, ...) its_irq_domain_alloc(..., nr_irqs, ...) its_alloc_device_irq(..., nr_irqs, ...) bitmap_find_free_region(..., get_count_order(nr_irqs))
Since ITS domain find a region of zero bits, the length of which must aligned to power of two. If nr_irqs is 30, the length of zero bits is actually 32, but only first 30 bits are really mapped.
On teardown, low-level domain only free these interrupts that actually mapped, and leave last interrupts dangling in the ITS domain. Thus the ITS device resources are never freed. On device driver reload, dangling interrupts prevent ITS domain from allocating enough resource.
irq_domain_free_irqs_hierarchy(..., nr_irqs, ...) its_irq_domain_free(..., irq_base + i, 1) bitmap_release_region(..., irq_base + i, get_count_order(1))
John reported this problem to LKML and Marc provided a solution and fix it in the generic code, see the discussion from Link tag. Marc's patch fix John's problem, but does not take care of some corner case, look one example below.
Step1: 32 interrupts allocated in LPI domain, but return the first 30 to higher driver.
111111111111111111111111111111 11 |<------------0~29------------>|30,31|
Step2: interrupt #16~28 are released one by one, then #0~15 and #29~31 still be there.
1111111111111111 0000000000000 1 11 |<-----0~15----->|<---16~28--->|29|30,31|
Step#: on driver teardown, generic code will invoke ITS domain code twice. The first time, #0~15 will be released, the second one, only #29 will be released(1 align to power of two).
0000000000000000 0000000000000 0 11 |<-----0~15----->|<---16~28--->|29|30,31|
In short summary, the dangling problem stems from the number of released hwirq is less than the one of allocated hwirq in ITS domain. In order to fix this problem, make irq_data record the number of allocated but unmapped hwirq. If hwirq followed by some unmapped bits, ITS domain record the number of unmapped bits to the last irq_data mapped to higher level, when the last hwirq followed by unmapped hwirq is released, some dangling bit will be clear eventualy, look back the trivial example above.
Step1: record '2' into the irq_data.dangling of #29 hwirq.
111111111111111111111111111111 11 |<------------0~29------------>|30,31| dangling: 000000000000000000000000000002
Step2: no change
1111111111111111 0000000000000 1 11 |<-----0~15----->|<---16~28--->|29|30,31| dangling: 0000000000000000 0000000000000 2
Step3: ITS domain will release #30~31 since the irq_data.dangling of #29 is '2'.
0000000000000000 0000000000000 0 00 |<-----0~15----->|<---16~28--->|29|30,31| dangling: 0000000000000000 0000000000000 2
Fixes: 4615fbc3788dd ("genirq/irqdomain: Don't try to free an interrupt that has no mapping") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Liao Chang <liaochang1@huawei.com> Link: https://lore.kernel.org/lkml/3d3d0155e66429968cb4f6b4feeae4b3@kernel.org/ --- include/linux/irq.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/include/linux/irq.h b/include/linux/irq.h index c3eb89606c2b..c48f10a0c230 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -167,6 +167,10 @@ struct irq_common_data { * @mask: precomputed bitmask for accessing the chip registers * @irq: interrupt number * @hwirq: hardware interrupt number, local to the interrupt domain + * @dangling: amount of dangling hardware interrupt, Arm ITS allocate + * hardware interrupt more than expected, aligned to power + * of two, so that unsued interrupt number become dangling. + * Use this field to record dangling bits follwoing @hwirq. * @common: point to data shared by all irqchips * @chip: low level interrupt hardware access * @domain: Interrupt translation domain; responsible for mapping @@ -180,6 +184,7 @@ struct irq_data { u32 mask; unsigned int irq; unsigned long hwirq; + unsigned long dangling; struct irq_common_data *common; struct irq_chip *chip; struct irq_domain *domain; @@ -455,6 +460,11 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) return d->hwirq; } +static inline void irqd_set_dangling(struct irq_data *d, unsigned int dangling) +{ + d->dangling = dangling; +} + /** * struct irq_chip - hardware interrupt chip descriptor * -- 2.17.1
| |