lkml.org 
[lkml]   [2022]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/7] gpio-f7188x: Add GPIO support for Nuvoton NCT6116
Date
Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.

For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.

On a chip level we do not have a manufacturer ID to check and also no
revision.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
drivers/gpio/Kconfig | 3 +-
drivers/gpio/gpio-f7188x.c | 104 ++++++++++++++++++++++++++++---------
2 files changed, 81 insertions(+), 26 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0642f579196f..3f64345fe40b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -874,10 +874,11 @@ config GPIO_104_IDI_48
module parameter.

config GPIO_F7188X
- tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
+ tristate "Fintek and Nuvoton Super-I/O GPIO support"
help
This option enables support for GPIOs found on Fintek Super-I/O
chips F71869, F71869A, F71882FG, F71889F and F81866.
+ As well as Nuvoton Super-I/O chip NCT6116D.

To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 878458249833..29c73ea96466 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
+ * GPIO driver for Fintek and Nuvoton Super-I/O chips
*
* Copyright (C) 2010-2013 LaCie
*
@@ -22,23 +22,36 @@
*/
#define SIO_LDSEL 0x07 /* Logical device select */
#define SIO_DEVID 0x20 /* Device ID (2 bytes) */
-#define SIO_DEVREV 0x22 /* Device revision */
-#define SIO_MANID 0x23 /* Fintek ID (2 bytes) */

-#define SIO_LD_GPIO 0x06 /* GPIO logical device */
#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */

-#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
+/*
+ * Fintek devices.
+ */
+#define SIO_FINTEK_DEVREV 0x22 /* Fintek Device revision */
+#define SIO_FINTEK_MANID 0x23 /* Fintek ID (2 bytes) */
+
+#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
+
#define SIO_F71869_ID 0x0814 /* F71869 chipset ID */
#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */
#define SIO_F71889A_ID 0x1005 /* F71889A chipset ID */
#define SIO_F81866_ID 0x1010 /* F81866 chipset ID */
-#define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same for f81966 */
+#define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same for F81966 */
#define SIO_F81865_ID 0x0704 /* F81865 chipset ID */

+#define SIO_LD_GPIO_FINTEK 0x06 /* GPIO logical device */
+
+/*
+ * Nuvoton devices.
+ */
+#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */
+
+#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */
+

enum chips {
f71869,
@@ -49,6 +62,7 @@ enum chips {
f81866,
f81804,
f81865,
+ nct6116d,
};

static const char * const f7188x_names[] = {
@@ -60,10 +74,12 @@ static const char * const f7188x_names[] = {
"f81866",
"f81804",
"f81865",
+ "nct6116d",
};

struct f7188x_sio {
int addr;
+ int device;
enum chips type;
};

@@ -171,6 +187,9 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
/* Output mode register (0:open drain 1:push-pull). */
#define f7188x_gpio_out_mode(base) ((base) + 3)

+#define f7188x_gpio_dir_invert(type) ((type) == nct6116d)
+#define f7188x_gpio_data_single(type) ((type) == nct6116d)
+
static struct f7188x_gpio_bank f71869_gpio_bank[] = {
F7188X_GPIO_BANK(0, 6, 0xF0),
F7188X_GPIO_BANK(10, 8, 0xE0),
@@ -255,6 +274,17 @@ static struct f7188x_gpio_bank f81865_gpio_bank[] = {
F7188X_GPIO_BANK(60, 5, 0x90),
};

+static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
+ F7188X_GPIO_BANK(0, 8, 0xE0),
+ F7188X_GPIO_BANK(10, 8, 0xE4),
+ F7188X_GPIO_BANK(20, 8, 0xE8),
+ F7188X_GPIO_BANK(30, 8, 0xEC),
+ F7188X_GPIO_BANK(40, 8, 0xF0),
+ F7188X_GPIO_BANK(50, 8, 0xF4),
+ F7188X_GPIO_BANK(60, 8, 0xF8),
+ F7188X_GPIO_BANK(70, 1, 0xFC),
+};
+
static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
{
int err;
@@ -265,13 +295,16 @@ static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
err = superio_enter(sio->addr);
if (err)
return err;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));

superio_exit(sio->addr);

- if (dir & 1 << offset)
+ if (f7188x_gpio_dir_invert(sio->type))
+ dir = ~dir;
+
+ if (dir & BIT(offset))
return GPIO_LINE_DIRECTION_OUT;

return GPIO_LINE_DIRECTION_IN;
@@ -287,10 +320,14 @@ static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
err = superio_enter(sio->addr);
if (err)
return err;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
- dir &= ~BIT(offset);
+
+ if (f7188x_gpio_dir_invert(sio->type))
+ dir |= BIT(offset);
+ else
+ dir &= ~BIT(offset);
superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir);

superio_exit(sio->addr);
@@ -308,11 +345,11 @@ static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset)
err = superio_enter(sio->addr);
if (err)
return err;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
dir = !!(dir & BIT(offset));
- if (dir)
+ if (f7188x_gpio_data_single(sio->type) || dir)
data = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
else
data = superio_inb(sio->addr, f7188x_gpio_data_in(bank->regbase));
@@ -333,7 +370,7 @@ static int f7188x_gpio_direction_out(struct gpio_chip *chip,
err = superio_enter(sio->addr);
if (err)
return err;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
if (value)
@@ -343,7 +380,10 @@ static int f7188x_gpio_direction_out(struct gpio_chip *chip,
superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out);

dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
- dir |= BIT(offset);
+ if (f7188x_gpio_dir_invert(sio->type))
+ dir &= ~BIT(offset);
+ else
+ dir |= BIT(offset);
superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir);

superio_exit(sio->addr);
@@ -361,7 +401,7 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
err = superio_enter(sio->addr);
if (err)
return;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
if (value)
@@ -389,7 +429,7 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
err = superio_enter(sio->addr);
if (err)
return err;
- superio_select(sio->addr, SIO_LD_GPIO);
+ superio_select(sio->addr, sio->device);

data = superio_inb(sio->addr, f7188x_gpio_out_mode(bank->regbase));
if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
@@ -450,6 +490,10 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
data->bank = f81865_gpio_bank;
break;
+ case nct6116d:
+ data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank);
+ data->bank = nct6116d_gpio_bank;
+ break;
default:
return -ENODEV;
}
@@ -480,18 +524,15 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
{
int err;
u16 devid;
+ u16 manid;

err = superio_enter(addr);
if (err)
return err;

err = -ENODEV;
- devid = superio_inw(addr, SIO_MANID);
- if (devid != SIO_FINTEK_ID) {
- pr_debug("Not a Fintek device at 0x%08x\n", addr);
- goto err;
- }

+ sio->device = SIO_LD_GPIO_FINTEK;
devid = superio_inw(addr, SIO_DEVID);
switch (devid) {
case SIO_F71869_ID:
@@ -518,17 +559,30 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
case SIO_F81865_ID:
sio->type = f81865;
break;
+ case SIO_NCT6116D_ID:
+ sio->device = SIO_LD_GPIO_NUVOTON;
+ sio->type = nct6116d;
+ break;
default:
pr_info("Unsupported Fintek device 0x%04x\n", devid);
goto err;
}
+
+ /* double check manufacturer where possible */
+ if (sio->type != nct6116d) {
+ manid = superio_inw(addr, SIO_FINTEK_MANID);
+ if (manid != SIO_FINTEK_ID) {
+ pr_debug("Not a Fintek device at 0x%08x\n", addr);
+ goto err;
+ }
+ }
+
sio->addr = addr;
err = 0;

- pr_info("Found %s at %#x, revision %d\n",
- f7188x_names[sio->type],
- (unsigned int) addr,
- (int) superio_inb(addr, SIO_DEVREV));
+ pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr);
+ if (sio->type != nct6116d)
+ pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV));

err:
superio_exit(addr);
--
2.35.1
\
 
 \ /
  Last update: 2022-08-25 12:45    [W:0.542 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site