lkml.org 
[lkml]   [2022]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique
Date
Pali Rohár <pali@kernel.org> writes:
> On 32-bit powerpc systems with more PCIe controllers and more PCI domains,
> where on more PCI domains are same PCI numbers, when kernel is compiled
> with CONFIG_PROC_FS=y and CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
> options, kernel prints "proc_dir_entry 'pci/01' already registered" error
> message.

Thanks, I'll pick this up.

> This regression started appearing after commit 566356813082 ("powerpc/pci:
> Add config option for using all 256 PCI buses") in case in each mPCIe slot
> is connected PCIe card and therefore PCI bus 1 is populated in for every
> PCIe controller / PCI domain.
>
> The reason is that PCI procfs code expects that when PCI bus numbers are
> not unique across all PCI domains, function pci_proc_domain() returns true
> for domain dependent buses.
>
> Fix this issue by setting PCI_ENABLE_PROC_DOMAINS and PCI_COMPAT_DOMAIN_0
> flags for 32-bit powerpc code when CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> is enabled. Same approach is already implemented for 64-bit powerpc code
> (where PCI bus numbers are always domain dependent).

We also have the same in ppc4xx_pci_find_bridges().

And if we can eventually make CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
the standard behaviour on 32-bit then everything would behave the same
and we could simplify pci_proc_domain() to match what other arches do.

cheers


> Fixes: 566356813082 ("powerpc/pci: Add config option for using all 256 PCI buses")
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
> arch/powerpc/kernel/pci_32.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index ffc4e1928c80..8acbc9592ebb 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -249,6 +249,15 @@ static int __init pcibios_init(void)
>
> printk(KERN_INFO "PCI: Probing PCI hardware\n");
>
> +#ifdef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> + /*
> + * Enable PCI domains in /proc when PCI bus numbers are not unique
> + * across all PCI domains to prevent conflicts. And keep PCI domain 0
> + * backward compatible in /proc for video cards.
> + */
> + pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
> +#endif
> +
> if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
> pci_assign_all_buses = 1;
>
> --
> 2.20.1

\
 
 \ /
  Last update: 2022-08-25 09:50    [W:0.070 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site