lkml.org 
[lkml]   [2022]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
On Thu, Aug 25, 2022 at 09:42:05AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>

> ---
>
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 0fcf5bd88fc7..69ae6503c2f6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -107,6 +107,9 @@ vreg_l5b_0p88: ldo5 {
> regulator-max-microvolt = <888000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b_1p2: ldo6 {
> @@ -115,6 +118,9 @@ vreg_l6b_1p2: ldo6 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7b_2p96: ldo7 {
> @@ -123,6 +129,9 @@ vreg_l7b_2p96: ldo7 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9b_1p2: ldo9 {
> @@ -131,6 +140,9 @@ vreg_l9b_1p2: ldo9 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> --
> 2.37.2.672.g94769d06f0-goog
>

\
 
 \ /
  Last update: 2022-08-25 23:42    [W:0.145 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site