lkml.org 
[lkml]   [2022]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH drm-misc-next v2 2/4] drm/vc4: plane: protect device resources after removal
On Fri, Aug 19, 2022 at 01:08:47PM +0200, Danilo Krummrich wrote:
> (Hardware) resources which are bound to the driver and device lifecycle
> must not be accessed after the device and driver are unbound.
>
> However, the DRM device isn't freed as long as the last user closed it,
> hence userspace can still call into the driver.
>
> Therefore protect the critical sections which are accessing those
> resources with drm_dev_enter() and drm_dev_exit().
>
> Fixes: 9872c7a31921 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()")
> Signed-off-by: Danilo Krummrich <dakr@redhat.com>
> ---
> drivers/gpu/drm/vc4/vc4_plane.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
> index eff9c63adfa7..c46acb770036 100644
> --- a/drivers/gpu/drm/vc4/vc4_plane.c
> +++ b/drivers/gpu/drm/vc4/vc4_plane.c
> @@ -19,6 +19,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_atomic_uapi.h>
> #include <drm/drm_blend.h>
> +#include <drm/drm_drv.h>
> #include <drm/drm_fb_dma_helper.h>
> #include <drm/drm_fourcc.h>
> #include <drm/drm_framebuffer.h>
> @@ -1219,6 +1220,10 @@ u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
> {
> struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
> int i;
> + int idx;
> +
> + if (!drm_dev_enter(plane->dev, &idx))
> + goto out;
>
> vc4_state->hw_dlist = dlist;
>
> @@ -1226,6 +1231,9 @@ u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
> for (i = 0; i < vc4_state->dlist_count; i++)
> writel(vc4_state->dlist[i], &dlist[i]);
>
> + drm_dev_exit(idx);
> +
> +out:
> return vc4_state->dlist_count;
> }
>
> @@ -1245,6 +1253,7 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
> struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
> struct drm_gem_dma_object *bo = drm_fb_dma_get_gem_obj(fb, 0);
> uint32_t addr;
> + int idx;
>
> /* We're skipping the address adjustment for negative origin,
> * because this is only called on the primary plane.
> @@ -1252,12 +1261,17 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
> WARN_ON_ONCE(plane->state->crtc_x < 0 || plane->state->crtc_y < 0);
> addr = bo->dma_addr + fb->offsets[0];
>
> + if (!drm_dev_enter(plane->dev, &idx))
> + return;
> +
> /* Write the new address into the hardware immediately. The
> * scanout will start from this address as soon as the FIFO
> * needs to refill with pixels.
> */
> writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
>
> + drm_dev_exit(idx);
> +

You did change the CRTC patch, but the comment to protect the entire
function also applies to this one.

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-08-24 17:49    [W:0.048 / U:2.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site