lkml.org 
[lkml]   [2022]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.19 097/365] dt-bindings: pinctrl: mt8195: Add and use drive-strength-microamp
Date
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 1b3ab63e56f0c30193b6787b083be4f4071b7fc6 upstream.

As was already done for MT8192 in commit b52e695324bb ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.

Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.

Fixes: 69c3d58dc187 ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630131543.225554-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
.../bindings/pinctrl/pinctrl-mt8195.yaml | 27 ++-----------------
1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index bb40398bb047..3d8afb3d5695 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -98,31 +98,8 @@ patternProperties:
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]

- mediatek,drive-strength-adv:
- description: |
- Describe the specific driving setup property.
- For I2C pins, the existing generic driving setup can only support
- 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
- can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
- driving setup, the existing generic setup will be disabled.
- The specific driving setup is controlled by E1E0EN.
- When E1=0/E0=0, the strength is 0.125mA.
- When E1=0/E0=1, the strength is 0.25mA.
- When E1=1/E0=0, the strength is 0.5mA.
- When E1=1/E0=1, the strength is 1mA.
- EN is used to enable or disable the specific driving setup.
- Valid arguments are described as below:
- 0: (E1, E0, EN) = (0, 0, 0)
- 1: (E1, E0, EN) = (0, 0, 1)
- 2: (E1, E0, EN) = (0, 1, 0)
- 3: (E1, E0, EN) = (0, 1, 1)
- 4: (E1, E0, EN) = (1, 0, 0)
- 5: (E1, E0, EN) = (1, 0, 1)
- 6: (E1, E0, EN) = (1, 1, 0)
- 7: (E1, E0, EN) = (1, 1, 1)
- So the valid arguments are from 0 to 7.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]

bias-pull-down:
oneOf:
--
2.37.2


\
 
 \ /
  Last update: 2022-08-23 10:30    [W:0.837 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site