lkml.org 
[lkml]   [2022]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/5] arm64: dts: ls2080a-rdb: add phy nodes
Date
From: Ioana Radulescu <ruxandra.radulescu@nxp.com>

Define PHY nodes on the board.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls2080a-rdb.dts | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..8b6915136997 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -14,6 +14,7 @@

#include "fsl-ls2080a.dtsi"
#include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
model = "Freescale Layerscape 2080a RDB Board";
@@ -23,3 +24,71 @@ chosen {
stdout-path = "serial1:115200n8";
};
};
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+ phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+ status = "disabled";
+
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1-phy@10 {
+ reg = <0x10>;
+ };
+
+ mdio1_phy2: emdio1-phy@11 {
+ reg = <0x11>;
+ };
+
+ mdio1_phy3: emdio1-phy@12 {
+ reg = <0x12>;
+ };
+
+ mdio1_phy4: emdio1-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0>;
+ };
+
+ mdio2_phy2: emdio2-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1>;
+ };
+
+ mdio2_phy3: emdio2-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x2>;
+ };
+
+ mdio2_phy4: emdio2-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x3>;
+ };
+};
--
2.37.1
\
 
 \ /
  Last update: 2022-08-24 01:50    [W:0.080 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site