lkml.org 
[lkml]   [2022]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/4] ASoC: apple: mca: Start new platform driver
From
Date

> On 22. 8. 2022, at 19:39, Mark Brown <broonie@kernel.org> wrote:
>
> On Fri, Aug 19, 2022 at 02:54:29PM +0200, Martin Povišer wrote:
>
> This all looks good, one style nit and a couple of requests for
> clarification below but basically this is fine.
>
>> +++ b/sound/soc/apple/mca.c
>> @@ -0,0 +1,1149 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Apple SoCs MCA driver
>> + *
>> + * Copyright (C) The Asahi Linux Contributors
>> + *
>> + * The MCA peripheral is made up of a number of identical units called clusters.
>
> Please make the entire comment block a C++ one so things look more
> intentional.

Is this so that it does not look like the SPDX header was added
mechanically? I will do it, just curious what the reasoning is.

>
>> +#define USE_RXB_FOR_CAPTURE
>
> What's this all about?

There’s something we can configure one way or the other way in the
hardware (choosing RXA or RXB unit in a cluster for capture). Since this
driver developed along reverse-engineering the hardware, this switch
got built in. I want to keep it for future experimentation. Also, as
the driver’s side gig is documenting the hardware, this way it
documents more.

>> +static int mca_fe_enable_clocks(struct mca_cluster *cl)
>> +{
>> + struct mca_data *mca = cl->host;
>> + int ret;
>> +
>> + ret = clk_prepare_enable(cl->clk_parent);
>> + if (ret) {
>> + dev_err(mca->dev,
>> + "cluster %d: unable to enable clock parent: %d\n",
>> + cl->no, ret);
>> + return ret;
>> + }
>> +
>> + /*
>> + * We can't power up the device earlier than this because
>> + * the power state driver would error out on seeing the device
>> + * as clock-gated.
>> + */
>> + cl->pd_link = device_link_add(mca->dev, cl->pd_dev,
>> + DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
>> + DL_FLAG_RPM_ACTIVE);
>
> I'm not clear on this dynamically adding and removing device links stuff
> - it looks like the main (only?) purpose is to take a runtime PM
> reference to the target device which is fine but it's not clear why
> device links are involved given that the links are created and destroyed
> every time the DAI is used, AFAICT always in the same fixed
> relationship. It's not a problem, it's just unclear.

Indeed the only purpose is powering up the cluster’s power domain (there’s
one domain for each cluster). Adding the links is the only way I know to
do it. They need to be added dynamically (as opposed to statically linking,
say, the DAI’s ->dev to the cluster’s ->pd_dev, which I guess may do
something similar), because we need to sequence the power-up/power-down
with the enablement of the clocks.

Martin

\
 
 \ /
  Last update: 2022-08-23 09:35    [W:0.106 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site