lkml.org 
[lkml]   [2022]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] hwmon: (dell-smm) Fail probing when cooling device registration fails
On Sun, Aug 21, 2022 at 09:11:24PM +0200, Armin Wolf wrote:
> Am 21.08.22 um 17:41 schrieb Pali Rohár:
>
> > On Sunday 21 August 2022 17:17:11 Armin Wolf wrote:
> > > Previously, it was thought that failing to register a cooling device
> > > would not be critical, so the probing was not aborted in such a case.
> > > This however would lead to userspace being unable to rely on those
> > > cooling devices, since they might not represent all fans being present.
> > > Fix that by failing probing when cooling device registration fails.
> > This patch does not fix address this issue fully. CONFIG_THERMAL can be
> > disabled during compile time and then cooling device would not be
> > registered too.
>
> I though of the cooling device feature as being optional "as a whole".
> So when CONFIG_THERMAL is disabled during compile time, the driver does
> not create any cooling devices. If however CONFIG_THERMAL was enabled
> during compile time, the driver should fail probing if it cannot register
> all cooling devices.
>

I disagree. The primary objective of this driver is to report environmental
data. Support for the thermal subsystem is an add-on. If instantiating
the thermal device fails, the driver should at least report temperatures
and fan speeds, as it did before thermal support was added.

Thanks,
Guenter

> Armin Wolf
>
> > > Tested on a Dell Inspiron 3505.
> > >
> > > Fixes: e0d3f7cb2606 ("hwmon: (dell-smm) Add cooling device support")
> > > Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> > > ---
> > > drivers/hwmon/dell-smm-hwmon.c | 4 +---
> > > 1 file changed, 1 insertion(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> > > index 7f8d95dd2717..1dab7591576a 100644
> > > --- a/drivers/hwmon/dell-smm-hwmon.c
> > > +++ b/drivers/hwmon/dell-smm-hwmon.c
> > > @@ -1013,12 +1013,10 @@ static int __init dell_smm_init_hwmon(struct device *dev)
> > >
> > > data->fan[i] = true;
> > >
> > > - /* the cooling device is not critical, ignore failures */
> > > if (IS_REACHABLE(CONFIG_THERMAL)) {
> > > err = dell_smm_init_cdev(dev, i);
> > > if (err < 0)
> > > - dev_warn(dev, "Failed to register cooling device for fan %u\n",
> > > - i + 1);
> > > + return err;
> > > }
> > >
> > > data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1,
> > > --
> > > 2.30.2
> > >

\
 
 \ /
  Last update: 2022-08-22 18:18    [W:0.364 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site