lkml.org 
[lkml]   [2022]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v5 01/24] dmaengine: Fix dma_slave_config.dst_addr description
Date
Most likely due to a copy-paste mistake the dst_addr member of the
dma_slave_config structure has been marked as ignored if the !source!
address belong to the memory. That is relevant to the src_addr field of
the structure while the dst_addr field as containing a destination device
address is supposed to be ignored if the destination is the CPU memory.
Let's fix the field description accordingly.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
---
include/linux/dmaengine.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c923f4e60f24..0c020682d894 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -394,7 +394,7 @@ enum dma_slave_buswidth {
* should be read (RX), if the source is memory this argument is
* ignored.
* @dst_addr: this is the physical address where DMA slave data
- * should be written (TX), if the source is memory this argument
+ * should be written (TX), if the destination is memory this argument
* is ignored.
* @src_addr_width: this is the width in bytes of the source (RX)
* register where DMA data shall be read. If the source
--
2.35.1
\
 
 \ /
  Last update: 2022-08-22 20:58    [W:0.189 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site