lkml.org 
[lkml]   [2022]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] hwmon: (dell-smm) Fail probing when cooling device registration fails
From
Date
Am 21.08.22 um 17:41 schrieb Pali Rohár:

> On Sunday 21 August 2022 17:17:11 Armin Wolf wrote:
>> Previously, it was thought that failing to register a cooling device
>> would not be critical, so the probing was not aborted in such a case.
>> This however would lead to userspace being unable to rely on those
>> cooling devices, since they might not represent all fans being present.
>> Fix that by failing probing when cooling device registration fails.
> This patch does not fix address this issue fully. CONFIG_THERMAL can be
> disabled during compile time and then cooling device would not be
> registered too.

I though of the cooling device feature as being optional "as a whole".
So when CONFIG_THERMAL is disabled during compile time, the driver does
not create any cooling devices. If however CONFIG_THERMAL was enabled
during compile time, the driver should fail probing if it cannot register
all cooling devices.

Armin Wolf

>> Tested on a Dell Inspiron 3505.
>>
>> Fixes: e0d3f7cb2606 ("hwmon: (dell-smm) Add cooling device support")
>> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
>> ---
>> drivers/hwmon/dell-smm-hwmon.c | 4 +---
>> 1 file changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
>> index 7f8d95dd2717..1dab7591576a 100644
>> --- a/drivers/hwmon/dell-smm-hwmon.c
>> +++ b/drivers/hwmon/dell-smm-hwmon.c
>> @@ -1013,12 +1013,10 @@ static int __init dell_smm_init_hwmon(struct device *dev)
>>
>> data->fan[i] = true;
>>
>> - /* the cooling device is not critical, ignore failures */
>> if (IS_REACHABLE(CONFIG_THERMAL)) {
>> err = dell_smm_init_cdev(dev, i);
>> if (err < 0)
>> - dev_warn(dev, "Failed to register cooling device for fan %u\n",
>> - i + 1);
>> + return err;
>> }
>>
>> data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1,
>> --
>> 2.30.2
>>

\
 
 \ /
  Last update: 2022-08-21 21:12    [W:0.078 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site