lkml.org 
[lkml]   [2022]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
Please ignore these emails. They are detached from the thread for some reason.

On Sat, Aug 20, 2022 at 8:00 PM Nam Cao <namcaov@gmail.com> wrote:
>
> because this function is not used. Also remove function
> odm_InbandNoise_Monitor_NSeries because it is a static function
> which is only called from ODM_InbandNoise_Monitor.
>
> Signed-off-by: Nam Cao <namcaov@gmail.com>
> ---
> .../staging/rtl8723bs/hal/odm_NoiseMonitor.c | 111 ------------------
> .../staging/rtl8723bs/hal/odm_NoiseMonitor.h | 7 --
> 2 files changed, 118 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> index 392cc8a398f5..b85b323cf5bd 100644
> --- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> +++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> @@ -17,114 +17,3 @@
> #define Valid_Min -35
> #define Valid_Max 10
> #define ValidCnt 5
> -
> -static s16 odm_InbandNoise_Monitor_NSeries(
> - struct dm_odm_t *pDM_Odm,
> - u8 bPauseDIG,
> - u8 IGIValue,
> - u32 max_time
> -)
> -{
> - u32 tmp4b;
> - u8 max_rf_path = 0, rf_path;
> - u8 reg_c50, reg_c58, valid_done = 0;
> - struct noise_level noise_data;
> - u32 start = 0;
> -
> - pDM_Odm->noise_level.noise_all = 0;
> -
> - max_rf_path = 1;
> -
> - memset(&noise_data, 0, sizeof(struct noise_level));
> -
> - /* */
> - /* Step 1. Disable DIG && Set initial gain. */
> - /* */
> -
> - if (bPauseDIG)
> - odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
> - /* */
> - /* Step 2. Disable all power save for read registers */
> - /* */
> - /* dcmd_DebugControlPowerSave(padapter, PSDisable); */
> -
> - /* */
> - /* Step 3. Get noise power level */
> - /* */
> - start = jiffies;
> - while (1) {
> -
> - /* Stop updating idle time pwer report (for driver read) */
> - PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
> -
> - /* Read Noise Floor Report */
> - tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
> -
> - /* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
> - /* if (max_rf_path == 2) */
> - /* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
> -
> - /* update idle time pwer report per 5us */
> - PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
> -
> - noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
> - noise_data.value[RF_PATH_B] = (u8)((tmp4b&0xff00)>>8);
> -
> - for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> - noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
> - noise_data.sval[rf_path] /= 2;
> - }
> - /* mdelay(10); */
> - /* msleep(10); */
> -
> - for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> - if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
> - noise_data.valid_cnt[rf_path]++;
> - noise_data.sum[rf_path] += noise_data.sval[rf_path];
> - if (noise_data.valid_cnt[rf_path] == ValidCnt) {
> - valid_done++;
> - }
> -
> - }
> -
> - }
> -
> - /* printk("####### valid_done:%d #############\n", valid_done); */
> - if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
> - for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> - /* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
> - if (noise_data.valid_cnt[rf_path])
> - noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
> - else
> - noise_data.sum[rf_path] = 0;
> - }
> - break;
> - }
> - }
> - reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
> - reg_c50 &= ~BIT7;
> - pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
> - pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
> -
> - if (max_rf_path == 2) {
> - reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
> - reg_c58 &= ~BIT7;
> - pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
> - pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
> - }
> - pDM_Odm->noise_level.noise_all /= max_rf_path;
> -
> - /* */
> - /* Step 4. Recover the Dig */
> - /* */
> - if (bPauseDIG)
> - odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
> -
> - return pDM_Odm->noise_level.noise_all;
> -
> -}
> -
> -s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
> -{
> - return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
> -}
> diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> index ab114543f39c..01c5c524d4e0 100644
> --- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> +++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> @@ -29,11 +29,4 @@ struct odm_noise_monitor {
> s16 noise_all;
> };
>
> -s16 ODM_InbandNoise_Monitor(
> - void *pDM_VOID,
> - u8 bPauseDIG,
> - u8 IGIValue,
> - u32 max_time
> -);
> -
> #endif
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-08-20 20:47    [W:0.133 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site