lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next v3 3/3] dt-bindings: net: adin1110: Add docs
Date
From: Alexandru Tachici <alexandru.tachici@analog.com>

Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
.../devicetree/bindings/net/adi,adin1110.yaml | 82 +++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml

diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
new file mode 100644
index 000000000000..b929b677f16a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+ - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+ The ADIN1110 is a low power single port 10BASE-T1L MAC-
+ PHY designed for industrial Ethernet applications. It integrates
+ an Ethernet PHY core with a MAC and all the associated analog
+ circuitry, input and output clock buffering.
+
+ The ADIN2111 is a low power, low complexity, two-Ethernet ports
+ switch with integrated 10BASE-T1L PHYs and one serial peripheral
+ interface (SPI) port. The device is designed for industrial Ethernet
+ applications using low power constrained nodes and is compliant
+ with the IEEE 802.3cg-2019 Ethernet standard for long reach
+ 10 Mbps single pair Ethernet (SPE).
+
+ The device has a 4-wire SPI interface for communication
+ between the MAC and host processor.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,adin1110
+ - adi,adin2111
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ adi,spi-crc:
+ description: |
+ Enable CRC8 checks on SPI read/writes.
+ type: boolean
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ ethernet@0 {
+ compatible = "adi,adin2111";
+ reg = <0>;
+ spi-max-frequency = <24500000>;
+
+ adi,spi-crc;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+ local-mac-address = [ 00 11 22 33 44 55 ];
+ };
+ };
--
2.25.1
\
 
 \ /
  Last update: 2022-08-02 18:00    [W:0.079 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site