Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH 2/5] arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors | Date | Tue, 2 Aug 2022 17:39:44 +0200 |
| |
The OV7251 and OV8856 camera sensor bindings do not allow property "gpios" and Linux driver does not parse it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Not tested on hardware. --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index b9304f81290a..f313f6964810 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1214,8 +1214,6 @@ camera@10 { reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; @@ -1256,8 +1254,6 @@ camera@60 { enable-gpios = <&tlmm 21 0>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "xclk"; -- 2.34.1
| |