lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] arm64: dts: qcom: sdm845-db845c: drop power-domains from CCI I2C sensors
Date
The Camera Control Interface I2C controller device node belongs to
TITAN_TOP_GDSC power domain, so its children do not need to specify it
again. The OV7251 and OV8856 camera sensor bindings do not allow
power-domains.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c6e2c571b452..b9304f81290a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1228,8 +1228,6 @@ camera@10 {
* both have to be enabled through the power management
* gpios.
*/
- power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
dovdd-supply = <&vreg_lvs1a_1p8>;
avdd-supply = <&cam0_avdd_2v8>;
dvdd-supply = <&cam0_dvdd_1v2>;
@@ -1273,8 +1271,6 @@ camera@60 {
*
* No 1.2V vddd-supply regulator is used.
*/
- power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
vdddo-supply = <&vreg_lvs1a_1p8>;
vdda-supply = <&cam3_avdd_2v8>;

--
2.34.1
\
 
 \ /
  Last update: 2022-08-02 17:41    [W:0.130 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site