lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
Date
The Lynx PCS integrated with ENETC port 0 does not support in-band
autoneg for the 2500base-x SERDES protocol, and prints errors from its
phylink methods. Furthermore, the AQR112 card used for these boards does
not expect in-band autoneg either. So delete the extraneous property.

Fixes: e426d63e752b ("arm64: dts: ls1028a-qds: add overlays for various serdes protocols")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 40d34c8384a5..b949cac03742 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -25,7 +25,6 @@ slot1_sgmii: ethernet-phy@2 {
&enetc_port0 {
phy-handle = <&slot1_sgmii>;
phy-mode = "2500base-x";
- managed = "in-band-status";
status = "okay";
};

--
2.34.1
\
 
 \ /
  Last update: 2022-08-02 15:51    [W:0.048 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site