lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 4/4] ARM: dts: imx7d-remarkable2: Enable the cyttsp5
Date
Add support for the cyttsp5 touchscreen controller for the reMarkable 2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/boot/dts/imx7d-remarkable2.dts | 100 ++++++++++++++++++++++++
1 file changed, 100 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index a2a91bfdd98e..fea480af8e48 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -8,6 +8,7 @@
/dts-v1/;

#include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>

/ {
model = "reMarkable 2.0";
@@ -47,6 +48,18 @@ reg_digitizer: regulator-digitizer {
startup-delay-us = <100000>; /* 100 ms */
};

+ reg_touch: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_TOUCH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_touch_reg>;
+ pinctrl-1 = <&pinctrl_touch_reg>;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -84,6 +97,70 @@ wacom_digitizer: digitizer@9 {
};
};

+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ tsc@24 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "cypress,tt21000";
+ reg = <0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&reg_touch>;
+ touchscreen-size-x = <880>;
+ touchscreen-size-y = <1280>;
+
+ button@0 {
+ reg = <0>;
+ linux,keycodes = <KEY_HOMEPAGE>;
+ };
+
+ button@1 {
+ reg = <1>;
+ linux,keycodes = <KEY_MENU>;
+ };
+
+ button@2 {
+ reg = <2>;
+ linux,keycodes = <KEY_BACK>;
+ };
+
+ button@3 {
+ reg = <3>;
+ linux,keycodes = <KEY_SEARCH>;
+ };
+
+ button@4 {
+ reg = <4>;
+ linux,keycodes = <KEY_VOLUMEDOWN>;
+ };
+
+ button@5 {
+ reg = <5>;
+ linux,keycodes = <KEY_VOLUMEUP>;
+ };
+
+ button@6 {
+ reg = <6>;
+ linux,keycodes = <KEY_CAMERA>;
+ };
+
+ button@7 {
+ reg = <7>;
+ linux,keycodes = <KEY_POWER>;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -177,6 +254,15 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};

+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* CYTTSP interrupt */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
+ /* CYTTSP reset */
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
@@ -184,6 +270,20 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};

+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_touch_reg: touchreggrp {
+ fsl,pins = <
+ /* TOUCH_PWR_EN */
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.37.1
\
 
 \ /
  Last update: 2022-08-02 15:00    [W:0.149 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site