lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5 1/6] RISC-V: use __smp_processor_id() instead of smp_processor_id()
Date
Use __smp_processor_id() to avoid check the preemption context when
CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no
return.

Without the patch,
[ 103.781044] sysrq: Trigger a crash
[ 103.784625] Kernel panic - not syncing: sysrq triggered crash
[ 103.837634] CPU1: off
[ 103.889668] CPU2: off
[ 103.933479] CPU3: off
[ 103.939424] Starting crashdump kernel...
[ 103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346
[ 103.950884] caller is debug_smp_processor_id+0x1c/0x26
[ 103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149
[ 103.965355] Call Trace:
[ 103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2
[ 103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e
[ 103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e
[ 103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c
[ 103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa
[ 103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26
[ 104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0
[ 104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4
[ 104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0
[ 104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70
[ 104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154
[ 104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a
[ 104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4
[ 104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254
[ 104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe
[ 104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16
[ 104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2
[ 104.067863] Will call new kernel at ecc00000 from hart id 0
[ 104.074939] FDT image at fc5ee000
[ 104.079523] Bye...

With the patch we can got clear output,
[ 67.740553] sysrq: Trigger a crash
[ 67.744166] Kernel panic - not syncing: sysrq triggered crash
[ 67.809123] CPU1: off
[ 67.865210] CPU2: off
[ 67.909075] CPU3: off
[ 67.919123] Starting crashdump kernel...
[ 67.924900] Will call new kernel at ecc00000 from hart id 0
[ 67.932045] FDT image at fc5ee000
[ 67.935560] Bye...

Fixes: 0e105f1d0037 ("riscv: use hart id instead of cpu id on machine_kexec")
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
---
arch/riscv/kernel/machine_kexec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c
index df8e24559035..86d1b5f9dfb5 100644
--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -171,7 +171,7 @@ machine_kexec(struct kimage *image)
struct kimage_arch *internal = &image->arch;
unsigned long jump_addr = (unsigned long) image->start;
unsigned long first_ind_entry = (unsigned long) &image->head;
- unsigned long this_cpu_id = smp_processor_id();
+ unsigned long this_cpu_id = __smp_processor_id();
unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
unsigned long fdt_addr = internal->fdt_addr;
void *control_code_buffer = page_address(image->control_code_page);
--
2.17.1
\
 
 \ /
  Last update: 2022-08-02 14:20    [W:0.129 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site